PDA

View Full Version : Flat magazine base pads



Sgt 127
09-15-2018, 07:19 PM
I don’t need the finger rest mags on the T9. Will the flat base stainless pads off the other models work on the T9?

thanks

DavidR
09-16-2018, 03:55 AM
Yes

Sgt 127
09-16-2018, 07:46 AM
Thanks!

wyntrout
09-16-2018, 11:35 AM
My P40 and P9 are similarly configured with ported barrels and O-rings with the flat metal bases. Kahr did sell black ones for a while... pricey at first, then dropped the plain black ones, but could use a black touchup pen by Birchwood Casey... does wear off, though.


http://www.kahrtalk.com/attachment.php?attachmentid=6907&stc=1&thumb=1&d=1352948966

As I did with the P40, I put an O-ring on the magazine with the metal base plate to stop pinching. The 3/32" thick by 3/4" inner diameter neoprene O-ring fits and doesn't cause binding or loosening of the lockup of the magazine.:eek:

http://i1134.photobucket.com/albums/m620/wyntrout/P40%20firing%20165%20Grain%20Blazers/FatO-ringsmiddlebrokenfollower_2117.jpg

15/16" to 3/32" by 3/4" on the label. The bottom mag has a 1/8" thick O-ring... too fat and prevents secure latching of the magazine.

I just wish they had some metal bases for the .45's.


Wynn

Sgt 127
09-16-2018, 12:49 PM
Again, thank you.

Old No7
09-23-2018, 02:51 PM
I've done the O-Ring trick to "Mind The Gap" * as well -- works slick!

( * A little UK humor for ya... )

Old No7

fsilber
11-07-2019, 05:51 AM
On my CT-9 I switched to the MK-9's metal floor plate on the magazine I keep in the gun (but not the spare I carry). I have narrow fingers so I've never felt any pinching with the CT-9, and I actually like having the little gap because it makes it easier to pull the magazine out out, should I need to.

I think it really does reduce make the gun more concealable. Not so much in reducing the size of any bulge (it's like shortening the grip by a small fraction of an inch), but rather by "rounding" the bottom edge of the gun -- so that the transition from "gun" to "no gun" is less sharp.

As I see it, there are three ways to make a gun more concealable:



Shortening the butt (e.g. by going from a Glock 17 to a Glock 19).
Flattening the gun (e.g. going from a Glock to a Kahr).
Disguising the bulge.


There are several ways to disguise the bulge:

You can change its shape, e.g. the way a pocket holster changes it from a gun shape to a wallet shape.
You can wear a random pattern to distract from the gun's outline (e.g. a Hawaiian print instead of a solid color shirt).
You can wearing a darker color to reduce the difference in light reflection over the gun versus around it.
You can smooth the gun's outline by wearing a looser cover garment, or a stiffer garment (e.g. jacket instead of a T-shirt).


Another way you can smooth the gun's outline is by making the edges of the gun less sharp -- which is what the narrowness of the metal floor plate accomplishes.

Some might ask, if I want more concealability why not just go to a smaller gun? The answer is that choice of a gun is a trade-off between concealability, bullet velocity, practical accuracy, and rapidity of the of the draw and shooting. That's why people differ so much in their preferences. That's why Kahr offers three sizes of 9mm.

My approach is to look for the most effective gun that is sufficiently concealable given the limits to my willingness to dress around the gun. The CT-9 is slightly more shootable, has slightly better ballistics and slightly greater capacity than the CW-9 or MP-9. Since I can conceal the CT-9 adequately, that's what I chose.

But if you can improve concealability even a little bit without at all sacrificing capacity, ballistics, velocity, or rapidity of fire -- why not go for it?

Old No7
11-07-2019, 08:08 PM
There are several ways to disguise the bulge...

I disguise the bulge of my Kahr's grip with a BuckTool multi-tool (a Leatherman would work too) worn in a belt sheath, so if my cover layer (vest of sweatshirt) rides up any, it's the sheathed tool that is seen as the "bulge"; the cover layer would have to come up quite a ways to expose the Kahr itself.

Old No7