Spot on - probably a combo of market saturation and no 'will' to go after it.
Type: Posts; User: kahrbrian
Spot on - probably a combo of market saturation and no 'will' to go after it.
Sorry to bore. Maybe cars are more interesting than Kahrs.
I'd add that Kahr started BASED on innovation. They offered a slim, small, lightweight gun with MORE barrel length - albeit slight -...
Please keep in mind it’s not mandatory and of course Kahr can keep putting out single stack guns for us older types, but why not copy the 365/shield+ mag and generate a slim light 12-15 round gun...
So my p365 xl is almost as slim as my ST9. The XL holds 12+1. The ST9 holds 8+1. It seems an easy step to redesign the frame so that the car can stay in the same ballpark. The new magazine designs...
Way to go. Great guns and yes, it’s great to see a nicely finished barrel. Many new guns are not well finished and take big efforts to clean.
If you read my most I did SHORTEN the extractor plunger a tad. But if you saw the chamber face, you would have polished it too. There are also videos on the shaping of the extractor and they make...
Yup - this is true. I recently picked up a P9 for about $400. NIB, but OS - two mags and standard sights.
I like the black, but the Cerakote finish they use is inferior - wears too quickly. ...
https://www.youtube.com/watch?v=JwrBbUQze2k
This video should be a sticky. IF you are OK with disassembling your slide, this is a NO BRAINER for any Kahr problems. My CT 380 could not go 2-3...
Congrats. My P9 is also GTG OTB. Very good trigger, reliable, and I transitioned it quickly to carry duty. EXCELLENT gun.
Finally got it to the range. 100%. Ball, HP, even golden sabers with no problem. Beginning to think all Kahr problems or most can be solved with some polishing. Gun shoots great.
I could NOT even manually with the slide OFF, fit a round under the extractor easily. Now I can put an offending round in a mag and load it like lightening.
Because you are already 'at it' by going after the slide parts, polishing the bolt face, especially the area under the extractor, and the extractor will likely solve ANY ammo problems. Then you can...
I did the edge of a roll of tape - but te rubber mallet produces better impulse transfer - a physics term, and why an egg thrown against a blanket doesn't break but one thrown against a wall does....
Some hope. I just tuned the extractor, polished it, the chamber face, the inside of the barrel hood and the ramp behind the bolt face. I polished the feed ramp earlier. In my adventure I noted that...
Gents.... THANKS!!! I used a rubber mallet to get it back more, but it was still ceased. Then I thought - hey lets take the slide stop out and take the slide off - then I thought - heck no! I need...
I bought a new brand of snap caps - STEEL WORX. (Don't buy them). Chambered a round, and now my P9 beauty is completely tied up. No amount of pressure will unseat the round. I guess I need to call...
There is not much of a radius, but maybe the whole deal is out of spec. (My P9 doesn't have the radius but feeds like gangbusters). I'll likely just call them tomorrow. Thanks.
https://www.youtube.com/watch?v=JwrBbUQze2k
This is what mine does but with two types of UMC - which again is supposedly gtg in these guns. His fix is interesting.
Slide is a bear to rack. A real bear. Maybe the chamber is way out of spec. Used UMC HP and ball.
Rounds seem to fit in the chamber but the chamber wall seems a tad rough compared to say
my...
All the same with both mags. The problem is NOT nose diving. They go into the chamber but cannot make it the whole way - I had to RAP the rear of the slide on the wooden bench every 2 rounds.
Bought a used PM9 - excellent from day one. Bought a new ST9 - good from day one. Bought a new P9 Old Stock - runs Wolf like a champ. Eyed up an LGS CT 380 - VERY nice trigger and felt right. ...
Won a NIB but OS P9 on GB. First time out no hiccups at all. Ran CCI brass and Tula. Very accurate. It can group as good as any gun I have - except my P09 which has a slightly longer sight...
From an OLD thread, it seems these function great but don't fit flush:...
Everywhere I can find on-line sells them with one - yes, Kahr lists 3. Weird.
I will say that Kahr, with a tad more thought, would do much better. If the value line took a Glock front sight and the 45s took 1911 mags and ran perfectly, it would help their sales.