Search:

A PCR is my edc. Great pistol. Only things I’ve done to it is to replace the trigger return spring with a reduced power spring along with a floating trigger pin from Cajun Gunworks. That reduced the...

I want to add that after backing off torx screw, fashioning a hold open devise, and placing a short piece of closet rod in my vise, takedown is a lot easier.

Thanks for the suggestions. And no, my...

A friend had the P365 on order at 2 separate places. One of the stores called that they had some in. He bought 2, one for him and one for his daughter. He hasn’t shot his but son in law has shot the...

Not in California.

The take down pin is now both easier to remove and install. I loosen the #6 torx screw slightly and it made a world of difference. I still need to use a short piece of closet rod in my vise to press...

The recoil spring has finally whipped me. I'm tired of wrestling with it to take down and put back together. I took it down earlier today for cleaning and had a terrible time taking it down and...

I wish my cm9 had a longer trigger reach or a "long" trigger. I shoot a lot of handguns and they have a far longer trigger reach. The shorter trigger reach of the cm9 causes me to have too much...

Yes, it is a nice and convenient place to shoot being half a mile from home. On pretty days, I'll take a lawn chair to set and relax. Peaceful and all to myself. I usually just shoot handguns there...

The other day I went to the pasture to shoot. That's where I've done most of my shooting lately. I carried my S&W model 14 38 special, my S&W model 18 22, as well as my Colt GCMN 45 and my Kimber...

Same problem with mine with wwb and federal champion. Rem/UMC has ran perfect for several hundred rounds. All defensive ammo has also ran perfect. The ammo I was having problems with would nose dive...

After firing other handguns today, I tried a 20 round box of Federal HST thru my cm9. The last 2 magazines, the slide failed to lock back with the magazine taking a bit of effort to remove. Puzzled,...

Far as I know, all striker fired pistols require the striker channel to be clear of oil, debri, fouling, etc. Most manuals state "no oil in striker channel. That's why most people use non chlorinated...

That's the information I was wanting to hear.:cool:

I know it would be impossible for me to be able to tell the difference between the two.

Has anyone had the opportunity to test the accuracy between the cm9 and the pm9? I know the pm9 with the polygonal rifling is supposed to be more accurate, just wondering if anyone has had a chance...

Sounds like a tipical gunshow to me.:cool:

Have you looked at the stickies in the kahr-tech sub forum? Look it over to see if there's anything to help. If not, call Kahr.

I purchased a new cm9 a few months ago and had a few start-up...

I carry my cm9 in my right pocket and 2 loaded magazines in my left front pocket. That's one thing I like about single stack magazines. Same even when carrying my government model .45.

Shot 50 rounds of Rem/Umc fmj and 19 rounds ( 3 mags + 1 ) of Critical Defense after replacing guide rod assembly and slide stop spring. All went well. The cm9 is now cleaned and back in my pocket. ...

The pistol is fully broken in with 750-800 rounds thru it, just wondering how much effect the new guide rod assembly would have on it.

Just replaced guide rod and springs on my cm9. The old one had lost the end cap. Also replaced the slide stop spring. That spring was a bugger to see and get in the hole, but got it installed with...

Glad I have backups. Still gonna miss it.

My cm9 has lost the end cap on the guide Rod. Has anyone lost their end cap? Would Kahr send me a new cap rod assembly or just a new end cap?

Would there be any problems firing it without the...

Magazine springs are installed correct.

Earlier I posted about nosedives with certain fmj ammo. I bought another 100 round box of Federal Champion (which was one of the worst offenders) and fired all of them yesterday with no nose dives. ...