Search:

Nice! :)

I had a Model 12 that was set up as yours is. Excellent shotgun, but I hunt and 12 gauge has gotten too heavy (not so much the gun, but the ammo) for me to tote around after quail. I...

"Their guns eat everything"

Apparently so....at least in .40 Short & Weak:rolleyes:;):)
https://i.postimg.cc/gJQZ76hP/HK-2004-RVR-Bullet.jpg

Any sign of damage/wear to the lower barrel lug?

No you don't!:)

That would get you pretty close to one of these:
https://i.postimg.cc/QdL0WNh6/P210-American-Standard-865.jpg
...of course ammo is a different matter...but it is a single stack.:hippie:

I agree. It seems to be a P9 with the new frame and front slide serrations. IMO, it looks to be a follow up on the PM9 Covert:
https://i.postimg.cc/SxpX1b9C/pm9covert.jpg...

Jimmy Bond was also fond of his .25... and cool was his thing as well...shaken, not stirred.

It will work now.
Regards,
Greg

DG,
I have to wonder if that might just be barrel specific. I say that because sometime back I had an extra PM9 barrel that had a hood that stopped considerably short of the breech face and it...

I only butcher my own stuff and to that end I use a reamer I bought from Brownells to do my 45 barrels. My CW45 was the first, but I've since done all my 1911s and other semi autos chambered in...

The person that made that post is usually a very solid contributor, but I question it. I suspect it is more likely he had a defective/improperly fit trigger vice an "original trigger". I say that...

All the CW45 slide internals will fit in the P45 slide. The CW45 barrel and guide rod may be slightly long and protrude from the P45 slide more than they would from the CW45 slide. I haven't fired a...

I did mention 50 rounds was not conclusive and I do intend to get in some more trigger time, but I think this will work out well.

I tried Magguts when they were first introduced for the Ruger LCP....

I'd say I have medium to medium small hands. I'm flirting with pinky under when using the OEM flat base plate. I probably end up that way when shooting it, but that doesn't bother me. In fact I kind...

Bawanna is spot on with this. A little oil on the surface does a lot to blend different shades.
I find you do not need to be as careful on a matte finish as on a gloss finish. The blue can come out...

Yesterday, I ran fifty rounds of steel case, Winchester 115gr. through my P365 without issue. The little glitch I had loading the first round (the first time) has completely disappeared. While I'm...

XD Talk is one of a group of forums (I believe it's actually only one other forum) that you can't link to here. Most other forums are fine.
I read your report and found it interesting. i think...

My experience with cold blue pretty much matches Bawanna's. They all react differently.

The pens are convenient and, generally, fine for scratches, but I find they don't last as long as the...

j6fOQ7fC8ks

Well, let's put that off for a while; in the meantime, print off a few of these for targets:
https://i.postimg.cc/VNvL5KgM/targetsmall.jpg
Larger version here:...

I'm not a fan, but from what I've read the order applies to federal agencies and public health documents.

Well done Doug! Thanks for the follow up :)

I have two bench blocks made from hockey pucks.. I also have a 3D printed bench block from MCARBO. They all work fine, but I'd say I probably use a...

Thanks for the feedback!
I have one in my P380 as well. Lakeline makes some fine products.

I received a kit for the 10+2 today. Installation went smoothly: remove OEM floor plate, spring and follower, then install MG follower, spring and floorplate. Floor plate locking tab is attached to...

Darn, those Turnbull Rugers are in the $650 t0 $900 range (with some ready to ship). If they were MKIIs I'd be on the phone.
I do like me some color:)...