Search:

I can't vouch for the validity of the reasons, but in another forum they mention that steel case ammo:

1. often has a jacket comprised of multiple layers of copper and steel, being harder on the...

Generally speaking, the smaller you make something the more exact the tolerances must be. One could generaliz that a full size pistol is generally more reliable than an ultra compact. I would...

IIRC, at the time of the test the M&PC was around 3.5." I don't think they had the 4" until the M2.0 came out. So the difference is even less, but I'm not a 9mm fan so I'm already biased. I do...

If I were to make a guess, I would guess that it is the old sight. I could be wrong:
...

Careful with those 1911 finger grooves that go under the grips. I had mine on my 1911 for years and the rubber started stretching enough to significantly rub on the magazine from the frame holes...

IMO, the best (assuming you are not speaking of bear loads) will be whatever HP fits these criteria:

1. Shoots reliably in your firearm
2. You can shoot well
3. You can get easily

Although I...

I have an older K9 purchased around 2001. It is hard to get the slide stop out. I grip it how Bawanna illustrated in his post, then use the plastic back of a screwdriver to push it out.

Probably not what you want to hear, but it's my understanding that the Kahr 45 chambers are tight and might not feed certain ammo well (if at all). For example, none of my Kahr 45's will reliably...

I have Vedder Holsters for a number of firearms including a CM9. Since one of my larger Kahrs is usually my EDC, I prefer the Vedder with a wing and an improvised wedge. That being said, I didn't...

I believe the vearvertail grip you are seeking is the one for the S&W Shield 45. The website lists it for the p9 and p40, and I would assume that the Shield 45 is a bit thicker than the CW45. ...

I have a Galco Fletch that I REALLY like for my K9 (thumbreak). I also have a Kramer Vertical Scabbard in Horeshide for my CW45 that I like (no thumbreak). Of the two, I would suggest the Galco for...

Update... I finally got around to cleaning the PM45 (summer carry). Although there were still some brass flakes in the firing pin channel, it was noticably less (particularly once you get into the...

My CW45 (bought new about 3 years ago) has similar beveling although it's even. Is the gun/magazine new? A full mag pressed into a closed slide gives a lot of tension and care must be made to make...

Thanks guys! I just thought I'd ask. I've been very busy lately so I haven't made it around to check my summer carry. I'll update with that firearm when I have a chance. I shoot a different ammo...

I thought I'd finally clean out the slide components (FPS, ejector, etc.) of my main carry CW45. I was thinking that I'd see a lot of lint, as lint tends to make it's way to the outside of my slide...

Although my PM45 is my second most carried (CW45 most), I generally unload in this manner: 1. finger off the trigger and pointing in a safe direction, 2. take the magazine out, and 3. using secure,...

I'm wondering if they're just dropping the "NY trigger package" requirement so they could just purchase "normal" pistols from manufacturers that don't make or don't want to make that option.

Just an update. I purchased the 3S for my M9, and it is VERY comfortable. However, since I am not confident in the way that the 2.75" 66-8 holster keeps the heft of the firearm above the belt...

Just wondering if you notice a difference in accuracy in addition to the jamming. My CW40 (bought new) would jam constantly (especially FMJ). I sent it back to Kahr, and the issue seems to be......

If you check on Kahr's website, you should see what years the newer ported barrels fit. I believe they have a description and pic on how to tell whether the model's specs are too old for the newer...

Grips from Bawanna sounds like a better option all around. I used the wood grips for a short term (longer screws, IIRC, so they are probably the older version). They definitely were thicker than...

Although it adds to the overall cost, I might suggest the CM9 (or PM9) and get a Lakeline grip extension ("magazine sleeve") for the 7 round magazine (+1 sleeve). It isn't pretty, but in hand it...

Questions about this business pop up on different firearm forums over the last few years.

Although I have no experience with them, it seems like most of the comments were that those that actually...

My Kahr 45's won't shoot Corbon 45's. So far I've only tried a couple of different brands, as I told my self I would use WWB JHP for my 45's and 40's over 3.5". I use Speer GD short barrel for the...

Thanks Bawanna. If IRRC, the thread I was reading was talking about failure to return to battery issues. I think they were suggesting that burrs or imperfections on the ejector were negatively...