Single spring did not work. Couldn’t fit enough spring on a guide rod that would provide enough force for reliable feeding. I guess that is why short guns have dual recoil springs. I had problems...
Type: Posts; User: delleetodd
Single spring did not work. Couldn’t fit enough spring on a guide rod that would provide enough force for reliable feeding. I guess that is why short guns have dual recoil springs. I had problems...
Please move to PM forum and it would be sweet if the mods would let me post pictures.
A little more thought into the outer spring going into coil bind. The springs both are compressing together but the larger spring binds first. At this point the spring rate goes up when the inner...
Ok so I made a little fixture to hold the stock recoil spring assembly of the PM45 while I measure it with a digital force gage. The stock guide rod sticks out about 1.6” when the slide is all the...
Thanks Greg. Looks like they will fit fine. I will order a P45 guide rod and some springs from Wolff. They have 18 to 23 pounds. Will have to cut the guide rod and springs to fit bit that isn’t a big...
If the PM45 inner spring was a little stiffer it would work better. I also think the outer recoil spring has the potential to pop out of the slide hole when just the small guide ride is hanging out....
I’m doing it because I feel the PM45 recoil springs are a bit off. I sometimes feel the slide bottom hard while shooting. My main concern is the round nut on the end of the guide rod can catch on the...
Can anyone give me the guide rod diameter of the CW9/P9?
CW45/P45?
Glock 19 gen 3 or older?
Thanks! I want to fit my PM45 with a single recoil spring just to experiment with different...
I have the Wolff reduced power striker spring on a CM9. Made a noticeable difference and I have about 500 rounds through it without a light strike. My wife carries that gun.
Check the extractor and make sure it is not stuck.
What did you use to round your edges? It looks really good!
I have the Wolff striker spring and I like it a lot. Lightens the pull a noticeable amount but it is not too light by any means. It helped my accuracy quite a bit too. I carry a CM9 or a Glock 26...
I've been finding 9mm 150 grain HST locally at Walmart. Selling for $22. Stumbled across it while buying range ammo and got a couple boxes to try. Thought some of you would like to know. Racine,...
Yes I don't think you need the followers but in my opinion they help make feeding smoother and they won't break. I didn't mean to put a bad taste in your mouth. I have 100% trust in the CM9 and I...
I have a CM9 with about 3 range trips on it. Get lakeline followers for your magazines if you want to eliminate the nosedive thing. 9mm rounds are tapered and when you stack a bunch in a striaght...
I like high velocity XTPs. Underwood has some nice ones. The shape of the XTP feeds nicely as a bonus.
I have a CM9 and it is very easy to chamber a round by hand. I can do it very slowly and it just slips right in. :p I use Lakeline mag followers which don't allow the round to tip down into the...
I agree and I would go through any gun I bought before firing it. My 1911 was finished better but there was problems that I had to sort out. It wasn't reliable off the bat even though it costed 3...
Wow! Pretty sweet.
Bought a CM9 and broke it down right away. I was a little disappointed to find some burrs on the under side of the slide. The machined groves that the slide rides on had a couple at the end. I...