Search:

kjorg,
Is the end of your guide rod beveled as shown in this photo: https://www.personaldefenseworld.com/wp-content/uploads/sites/6/2014/11/kahr-ct45-barrel.jpg or is squared off?
IMO, being...

Galloway's product will work in the S9.
According to Kahr's website all models (except CM/CW/P380) use the same striker spring guide:...

I haven't seen them,
Thanks for asking as I must be stuck in 2020:blushing:...here's his current Shot show video (he was disappointed with it):

https://www.youtube.com/watch?v=V26xvyTYexs

TheFirearmGuy video:

https://www.youtube.com/watch?v=lRhjJeBLFuA

Thank you! Alive and well...pray the same for you and yours.
Regards,
Greg

Did you notice those light trigger pulls when dry firing...firing live rounds...both? If it was live fire, did the rounds go off? I ask because I wonder if the gun was properly reset or the trigger...

I agree.
FWIW, here's a shot of my CWP 45 (a mix of parts); note how both sides of the mag well are beveled to mimic each other
https://i.postimg.cc/FH0DjyfK/mw1-1-22.jpg

A side view of the...

My caliper eludes me just now, but there is some difference in dimensions between the 9 and 40 mags. I have my PM9 and P40 Covert handy and the 40 mag will fit into the PM9 but it is a tighter fit...

You are welcome.
Regards,
Greg

Left to right: Bronze Star, Purple Heart, National Defense Service Medal, Viet Nam Service Medal, Republic Of Vietnam Campaign Medal

Who got it right?...Dieudonné Saive?

The previous two members are correct


I tried a CW45 slide on a 9/40 frame and the 45 slide is indeed too wide. It does not engage the rear frame rails properly and can be lifted off:yo:
I say...

The only one I've seen is the Streamlight TLR6. It's a combination LED light/red laser unit that fits on the trigger guard. There is a Kahr specific version: 69274
Regards,
Greg

Welcome to the forums dp5710!

Some folks are quite fond of the XS Big Dot sights system. It's available for the P380:
https://www.xssights.com/Kahr_PKSeries_.380ACP_Sight_Selection_pr-12452.aspx...

FWIW, I have an older P380 and it's slide stop does not have a groove on that step.

However, the spring is there to bias the stop down. The magazine follower lifts the stop after the last round...

https://i.postimg.cc/kX9rByvk/ex1-copy.jpg

thinman,
How does your TP9 shoot in regards to it's sights? Point of aim = Point of impact or high/low of that?

Nice score Colonel!
Taylors has sights: https://taylorsfirearms.com/accessories/accesories/sights-accessories.html
If they ever get them back in stock, I'll have one of their 1885 Low Wall rifles...

https://i.postimg.cc/k5sHSFtK/pm9acopy.jpg
That one corner to the outside of the slide could be rounded a bit (it's does no harm to do so to it or the edge below it, just stay away from where the...

That is not uncommon in semiauto pistols, especially with the myriad of bullet shapes available today.

However, as zamboni wrote "If it shoots it is fine."

If it doesn't "shoot" it usually...

First, your gun is not operating correctly. Without a magazine in place, the the disconnector should be pushing the trigger bar out of contact with the cocking cam. You should not see the cocking cam...

I don't own (nor have I handled) a Kahr with the magazine disconnect, please keep that in mind as I write the following (just guesswork on my part):

It seems to me that the magazine disconnect...

After some adjustment to your image, I'd guess that is a P380 CA with a magazine disconnect.
https://i.postimg.cc/0QVXG3b5/HVDr4Wig.jpg
If so, that part is the magazine disconnect. It disconnects...

Probably not a pocket rocket, but they do have a 380...https://www.armscor.com/firearms/bbr-series/baby-rock-380/
You'll see some complaints here:...

Seems to work for me:confused: