Tommy Gun   Crimsontrace   Mitch Rosen   CrossBreed Holsters
Page 44 of 44 FirstFirst ... 34424344
Results 431 to 439 of 439

Thread: Kahr PM and CM Series Positive Feedback - Post Yours!

  1. #431

    Default

    I bought my CM9 about fours years ago. It has been an excellent and totally reliable pistol. I have a variety of holsters for it to allow for different modes of carry. I pocket carry a lot around here in S.C. when it gets hot out. I just don't like sweat soaked guns. Pocket carry has some real advantages when walking around. I think J frame S&Ws make a lot of sense and carry one of mine from time to time. That said, the CM9 has better sights, holds more ammo and is about as easy to carry. I have never understood why the CM9 is not more popular than it is.

  2. #432

    Default

    I found a super deal recently for a factory new PM9094 ($404), so I had to pounce. After cleaning, I put the first 200 break-in rounds through it earlier this week. The only failure I received was the slide not staying open after the last round (which happened on all three factory-supplied magazines). As expected, the problem went away after approx. 75 rounds and the performance was flawless on all magazines thereafter. For reference, I used both CCI and Federal 115 grain FMJ ammo.

    I also have a CW380. Just like the PM9, after a few failures during break-in (one FTE and a few failures to return to battery), it has performed flawless as well.

    Like most, I'm not one for reading instruction manuals. But take Kahr at their word - perform the 200-round break-in, maintain properly, and you'll most likely have a handgun that will serve you well for a lifetime.

    I love my Kahr's and am looking forward to adding a couple more to my collection!

  3. #433
    Join Date
    Jan 2018
    Posts
    7

    Default unbelievable customer service!

    See the thread below about my cm45 -

    TL/DR : Lost retaining nut on recoil spring assembly, Kahr shipped new recoil spring assembly - no questions asked.

    http://www.kahrtalk.com/showthread.p...er-nut-missing

  4. #434
    Join Date
    Apr 2018
    Posts
    1

    Default

    New member...cm9 and cw380 owner. Great guns and at the top of the heap for small carry IMO. Going to buy a cm45 soon. Will my cm9 holsters fit it?

  5. #435
    Join Date
    Apr 2018
    Posts
    1

    Default Holster Question

    New member...cm9 and cw380 owner. Great guns and at the top of the heap for small carry IMO. Going to buy a cm45 soon. Will my cm9 holsters fit it?

  6. #436
    Join Date
    Apr 2013
    Location
    NE Ohio
    Posts
    5,732

    Default

    Quote Originally Posted by Ken 3d View Post
    New member...cm9 and cw380 owner. Great guns and at the top of the heap for small carry IMO. Going to buy a cm45 soon. Will my cm9 holsters fit it?
    welcome Ken. That depends on the holster but I wouldnít expect it to fit. I believe itís .11Ē wider and the barrel is longer too. With that said I do have a Bulldog Cases slide and Galco Yaqui slide that work for a lot of pistols, including every Kahr Iíve owned, adequately...but just adequately.

    https://www.bulldogcases.com/product...ather-holster/

    http://www.gunsandammo.com/gear-acce...olster-review/
    ​O|||||||O

  7. #437
    Join Date
    May 2018
    Posts
    3

    Default

    Just got a new CM9 went to the range it performed flawless, very pleased. Can I run +P ammo through it ?

  8. #438
    Join Date
    Sep 2011
    Location
    Central Iowa
    Posts
    39

    Default

    I am so impressed with my CM9. Today I shot it for the first time. After degreasing it, cleaning it and then properly lubricated it the little 9 really performed. Accuracy at 15 or so yards was outstanding and I didn't have any hiccups with the 60 rounds of factory and reloaded ammo. These little power houses are really tight and precision built. The Rolex of pocket guns.

  9. #439
    Join Date
    Apr 2018
    Posts
    16

    Default

    Quote Originally Posted by Zertekfl View Post
    Just got a new CM9 went to the range it performed flawless, very pleased. Can I run +P ammo through it ?
    Yes

    https://www.kahr.com/faq/

    Q Which ammunition is recommended for use with Kahr firearms?
    A. Kahr Arms does not endorse any particular brand of ammunition. However, not every brand of ammunition produces the same results. Please check the markings on the barrel hood of your firearm to determine the proper caliber. Kahr suggests a visit to a pistol range to test fire different brands of ammunition in the proper caliber. Kahr do not recommend steel case, reloads or un-jacketed ammunition. The Kahr pistol is rated to +P.






  10. #440
    Join Date
    Aug 2010
    Location
    Toledo Ohio
    Posts
    150

    Default

    I've owned a CM9 since they first came out. Mine has been utterly reliable from day one. I recently picked up a PM45. I've only shot it twice but it too has been 100%. I just got a Crossbreed owb for it so it will be in the carry rotation soon.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Kahr Shop   Tommy Gun Shop   Xssights   Magnum Research new