Go to this thread for the pdf file to print:
Glock Talk - View Single Post - Detail Stripping the Kahr's Upper
Go to this thread for the pdf file to print:
Glock Talk - View Single Post - Detail Stripping the Kahr's Upper
Ruger Super Single Six
Dan Wesson 357 Mag Revolver, with 6" & 3" barrels
Kahr P45
S&W M&P 9mm w/CT Grip
Kel-Tec P-3AT w/CT Laser
Glock G27 w/CT Grip
Kahr PM9094 w/CT Laser
NRA Life Member
YOUR THE MAN!!! Nice job again..
I am hoping that John willmake this a sticky also. It is excellent and should be something members can go to in a hurry for help on the upper slide..
When I dismantle an upper I use this coat hanger "tool" to hold the striker spring and guide rod in place while I push in the pin that retains the rear plate. It makes the task a good bit easier.
Eye protection is strongly advised.
Happy to Help where I can!
Ruger Super Single Six
Dan Wesson 357 Mag Revolver, with 6" & 3" barrels
Kahr P45
S&W M&P 9mm w/CT Grip
Kel-Tec P-3AT w/CT Laser
Glock G27 w/CT Grip
Kahr PM9094 w/CT Laser
NRA Life Member
yes riply 76, that is a cool way to to it to. I tried it and it works great. Have to agree eye protection is a must. I also when getting ready to slide that backing plate off the slide put the tnire unit in a big zip lock bag when I pullthat plate off, as you well know little things tend to fly when that plate comes off - sometimes. If one takes that plate off slowly, he can catcht hat strker plunger and extractor spring. A nice big zip lock will catch them for sure.
Oh yeah, this one is a sticky! I really appreciate you posting this info here. I hope the gang at Glocktalk will find this a welcome home as well. I have refrained from posting an invite over there as I did not want to offend the site owners. It is a good forum and I have enjoyed being over there for info on the Glocks I have had over the years.
Thanks again!
John
Chief Administrator
Kahrtalk.com
thanks John, now we have two really good sticky's for the kahrs. keep up the good work..
Great tip! I have been using a flat blade screw driver to hold the striker sping assy down. It is quite tricky and you need 3 hands. I will definitely cut up oa coat hanger!
Good job!
Great sticky.. I now have a lot of smal parts laying on my desk. Does the striker channel get lubed or does it run dry like the Glocks?