Who has experience adding a CT to a CW9? How difficult was it? Any tricks I should know? How do they hold up? Are you happy with the CT?
Who has experience adding a CT to a CW9? How difficult was it? Any tricks I should know? How do they hold up? Are you happy with the CT?
I put a laser-lyte on my wife's still allows traditional sighting very accurate. under $100 you won't be disappointed!
My New Web Store!
www.teampython.com
__________________________________________________ _____
The loudest sound in the world is a “click” when you need a “bang.”
How difficult was it? If you can tighten 2 allen wrench screws that is all it takes.
Any tricks I should know. just lay it on a solid surface
How do they hold up? I have used mine for 6 mo with no problems carry it every day
Are you happy with the CT? Yes
Should take less then 10 min. to install, but remember it needs final adjustment to be sighted correct.
If you look around on line you can get some good prices mine was $160 shipped.
Mike
KAHR CW9, GLOCK 36, GLOCK 26,
Smith and Wesson 40VE
RUGER SR22, RUGER Mini 14, HENRY .22, REMINGTON 597 .22, RMINGTON MODEL 4 .270, REMINGTON 1100,
Installing is a piece of cake. The one problem I had was that the bright lights at the indoor range made it impossible to see, so I wasn't able to get it sighted in. I'll have to wait until I get to fire it outdoors in some shade or late in the evening.
To sight in, I just looked through the sights at an obect on the living room wall 20 ft away, and adjusted it as I pointed the gun (empty, of course). That was good enough for me. Kind of like bore sighting a rifle and scope.
Hope this helps save you a bunch of ammo.
Rod
KAHR CW9, GLOCK 36, GLOCK 26,
Smith and Wesson 40VE
RUGER SR22, RUGER Mini 14, HENRY .22, REMINGTON 597 .22, RMINGTON MODEL 4 .270, REMINGTON 1100,
RevRay, I never touched the elevation or windage after that except when I replaced the battery which entails removing the one half which covers the battery. And then it was a small adjustment of the elevation.
Hope yours works as well.
Rod
KAHR CW9, GLOCK 36, GLOCK 26,
Smith and Wesson 40VE
RUGER SR22, RUGER Mini 14, HENRY .22, REMINGTON 597 .22, RMINGTON MODEL 4 .270, REMINGTON 1100,
I know this is an old thread but I'll add something for future readers:
After installing my CT on my CW9, the laser was off target high and to the right, so much so that I couldn't get it adjusted to suit me. After about 2 months of wrestling with it, I removed it and found that the date code sticker that is applied to the internals on one of the halves overlapped onto where the CT frame overlaps the bottom of the gun's trigger guard. This was just enough to throw the entire shebang off-center. I peeled the label off and reapplied it properly and everything was fine after a little readjusting.
I will also add something that I learned since I first posted on this thread ... if ever you find that the red dot seems to be losing its brightness, first try cleaning the lens. As I said above, I was having a hard time seeing my red dot in daylight ... my shooting partner suggested I clean my lens ... so I did, and now it is perfectly fine. Duh!