Crimsontrace   Tommy Gun Shop   Xssights   Magnum Research new
Results 1 to 10 of 12

Thread: P380 inital impressions - shoots low and odd bullet debris in breech area

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Join Date
    Nov 2011
    Location
    Tennessee
    Posts
    63

    Default

    Caen1944,
    That raised my batting average...

    I saw a post here recently that someone put a set of P9 (?) sights on a P380; apparently the dovetail cuts are the same or closely similar. His purpose was to have greater visibility of the sight picture (bigger picture). Maybe the previous owner had the night sights put on and they pulled the wrong front. I am pretty sure all other models, except .380, use the same height sets.

    The tritiums will be larger than stock and I don't have any Trijicons, so I can't say what their correct height is but I don't think the front should be much more than .010 above the rear. If no one on the forum can verify the correct Trijicon front and rear heights for P380, you might discuss it with Kahr. I hope it is just a front sight swap but you should verify that rear with someone, too.

    edit: Caen, I can confirm the .1715 is the same height as the front on my PM9.


    Last edited by TennSCN; 02-16-2015 at 08:34 PM. Reason: Confirming
    Bad decisions make good stories...

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Mitch Rosen   Tommy Gun   Kahr Shop   CrossBreed Holsters