CrossBreed Holsters   Magnum Research new   Kahr Shop   Tommy Gun Shop
Results 1 to 4 of 4

Thread: Used Baby Eagle..NEED HELP!

  1. #1
    Join Date
    Dec 2016
    Posts
    2

    Default Used Baby Eagle..NEED HELP!

    Got a used all steel 9mm baby eagle for almost nothing that has barrel problem. My brother in law sold it to me for $120.00. He used rem 9mm ammo from dick's last time out shooting and the gun jammed. The slide dug into the top of the barrel at the locking lugs. He said the range gunsmith had to use a rubber hammer to knock the slide back into battery. Did it 2 times and caused the sharp edges on all of the front facing locking lugs edges to get dug into. About 1/2 to 1/3 the thickness of a dime in size. The slide moves to the rear fine when racked by hand but feels a little rough but hard to even notice. I am hoping to get a new barrel but not sure if anyone knows where to get one or possible cause of this problem. I know my brother in law loved this gun and did not abuse it in any way.
    Any ideas, help or suggestions would be great.
    Thanks guys
    Oscar

  2. #2
    Join Date
    Sep 2010
    Posts
    7,216

    Default

    I found this on the magnum research site. Hope this helps:


    • Q. I can repair my own gun and do not wish to send it to the factory. Can I get a replacement part?

      A.
      Simply contact the service department at 508-635-4271 or send an e-mail to info@magnumresearch.com to receive a replacement part.
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  3. #3
    Join Date
    Jan 2010
    Location
    Near the Gila Mountains in SW AZ.
    Posts
    5,550

    Default

    If a previously reliable firearm suddenly needs to be beat into battery and then shows damage to locking surfaces, I'd be inclined to think it's time for some professional evaluation of the situation....or at least post photos of all the components so we can make some guesses
    Regards,
    Greg

    BTW, welcome to the forums. I'm not trying to make light of your problem and I'm genuinely interested in seeing the parts. I'm also sincere about having the Baby Eagle looked at by a professional (if that's possible in your situation).
    [<a href=http://i43.tinypic.com/2n7fnux.gif target=_blank>http://i43.tinypic.com/2n7fnux.gif</a>

  4. #4
    Join Date
    Feb 2017
    Posts
    21

    Default

    What was the result?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Crimsontrace   Xssights   Mitch Rosen   Tommy Gun