Magnum Research new   Crimsontrace   Tommy Gun Shop   Mitch Rosen
Page 4 of 8 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 75

Thread: Cz p-01

  1. #31
    Join Date
    Jan 2010
    Location
    Near the Gila Mountains in SW AZ.
    Posts
    5,550

    Default

    Quote Originally Posted by yqtszhj View Post
    I was actually a little concerned about the same thing when I ordered them. In fact there is no discomfort that feel at all and to me it feels better. The pistol seems to settle farther back into the web of the hand making the legnth to the trigger a little shorter and the hand ride higher on the grip. All of which is good. So no complaints at all.

    The grip actually feels about like the size of the CW45 which is about one of my favorites sizes.
    Thanks for the reply boss! That's good info

    Quote Originally Posted by Bawanna View Post
    That's super. I can see a set of those in Greg's future. I'm pretty sure he's a fan of slim / thin too.
    I do like slim and I do like how the CW45 feels in hand, but I'm pretty happy with the CZ grips I already have. Those were acquired after Sir yqtszhj posted his experience with them:

    Still, somebody has a "BNIB unfired Steel Railed Compact (SP01 Compact as some refer to them)" up for sale on another forum. That's been tempting me and it would be a good candidate for some of these carbon fiber grips. You all are a devilish influence

    Regards,
    Greg
    [<a href=http://i43.tinypic.com/2n7fnux.gif target=_blank>http://i43.tinypic.com/2n7fnux.gif</a>

  2. #32
    Join Date
    Sep 2010
    Posts
    7,216

    Default

    Hey, are the mags in your SP-01 factory or maybe Mec-Gar? Been looking at a couple of flush fit Mec-Gar mags for the P-01. May have to get one to try it out as a replacement for the rubber base factory mags?
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  3. #33
    Join Date
    Jan 2010
    Location
    Near the Gila Mountains in SW AZ.
    Posts
    5,550

    Default

    Quote Originally Posted by yqtszhj View Post
    Hey, are the mags in your SP-01 factory or maybe Mec-Gar? Been looking at a couple of flush fit Mec-Gar mags for the P-01. May have to get one to try it out as a replacement for the rubber base factory mags?
    In the photo, that's a 16 round Mec-Gar in the SP-01.
    Regards,
    Greg
    [<a href=http://i43.tinypic.com/2n7fnux.gif target=_blank>http://i43.tinypic.com/2n7fnux.gif</a>

  4. #34
    Join Date
    Jan 2010
    Location
    Near the Gila Mountains in SW AZ.
    Posts
    5,550

    Default

    Quote Originally Posted by Bawanna View Post
    .... since I don't own a CZ (YET) ....
    Here's another variant for your consideration sir:
    [<a href=http://i43.tinypic.com/2n7fnux.gif target=_blank>http://i43.tinypic.com/2n7fnux.gif</a>

  5. #35
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    32,470

    Default

    I don't think I'll be needing the full auto version. Might send that video to a detective here. Couple of them drop to their knees at the mere mention of Vickers name.

    Course I do nearly the same thing when I hear Greg's name. And he calls us a bad influence????
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

    RIP Muggsy & TMan

    "If you are a warrior legally authorized to carry a weapon and you step outside without that weapon, then you become a sheep, pretending that JOCKO will not come today."

  6. #36
    Join Date
    Jun 2014
    Location
    Upstate, South Carolina
    Posts
    1,377

    Default

    FYI, I wanted extra mags for my SP01, CZ mags were $42 for 18 round mags, I bought 17 Meg-Ger round mags from Greg Cote for $24, for that price I can live with one round less. IMHO Mec-Ger mags are good to go. I just placed an order for two more PCR mags, CZ mags are 40+, Mec-Ger around $50 shipped for two. Even if I only use the Mec-Ger for range time, the saving is worth it. I have had great success with the CZ mags from Mec-Gar, and would not hesitate to buy more.
    NRA Benefactor

  7. #37
    Join Date
    Jun 2014
    Location
    Upstate, South Carolina
    Posts
    1,377

    Default

    FYI, you folks, have cost me close to 1000.00 US dollars. With shipping, transfer fees and so on the PCR is going to cost $600.00, to break it in I ordered 1000 rounds of 124grn 9mm ammo, which adds another $185, plus two mags for another $50, and a custom leather holster for $100. Contact me for donation information.

    I plan on listing my G26 on the local ArmsList, if anyone here is interested, shoot me a PM.

    -Ken
    NRA Benefactor

  8. #38
    Join Date
    Sep 2010
    Posts
    7,216

    Default

    Quote Originally Posted by kenemoore View Post
    FYI, you folks, have cost me close to 1000.00 US dollars. With shipping, transfer fees and so on the PCR is going to cost $600.00, to break it in I ordered 1000 rounds of 124grn 9mm ammo, which adds another $185, plus two mags for another $50, and a custom leather holster for $100. Contact me for donation information.

    I plan on listing my G26 on the local ArmsList, if anyone here is interested, shoot me a PM.

    -Ken
    Awesome, my commission check is gonna be good this month... LOL

    Actually I feel your pain. I've bought the pistol, grips, and ordered a case of Czech ammo to shoot through my Czech pistol. I'm down to only 400 rounds reserve. Been shooting what was my Hillary (sorry to bring up that name) ammo stash all summer since she lost. Kind of a celebration if you know what I mean.

    Fortunately the kids bought me a custom holster for my P-07 on my birthday and the P-01 fits OK for now. Gotta order a couple of mags shortly.

    I know the wife is tracking spending and I see a big purse, dress, shoe, or new IPhone expense for her in my near future.
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  9. #39
    Join Date
    Jun 2014
    Location
    Upstate, South Carolina
    Posts
    1,377

    Default

    Quote Originally Posted by yqtszhj View Post
    Hey, are the mags in your SP-01 factory or maybe Mec-Gar? Been looking at a couple of flush fit Mec-Gar mags for the P-01. May have to get one to try it out as a replacement for the rubber base factory mags?
    https://www.midwayusa.com/product/81...und-steel-blue
    NRA Benefactor

  10. #40
    Join Date
    Aug 2016
    Posts
    759

    Default

    I got 2 of those Mec-Gar mags from Midway for my C-100. They're 14 round, as opposed to the 15 round factory mags. They work fine in my C-100 though, and for the price, I'll live with them.

    I did order 2 of the CZ rubber base plates from Cajun Gun Works for them. The base plates fit the mags fine, but make it tough to seat the mags in the gun. Rather than filing out the catch slot on the mags, I just put the metal ones back on.

    By my twisted logic, having those rubber base plates sitting in my spare parts bin is a good reason to buy a P-01 or a PCR and some extra Mec-Gar mags to put them on. It's a vicious circle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
CrossBreed Holsters   Tommy Gun   Xssights   Kahr Shop