Kahr Shop   Mitch Rosen   Crimsontrace   Tommy Gun Shop
Results 1 to 5 of 5

Thread: Old style recoil assembly vs new style assembly

  1. #1

    Default Old style recoil assembly vs new style assembly

    What is the difference in the Old vs New style recoil assembly for the PM9 and PM40? Is the MK40 a old style recoil assembly???

  2. #2
    Join Date
    Aug 2016
    Posts
    465

    Default

    There's a type 1, type 2, and type 3 recoil assembly for the PM series. The 9 and 40 caliber are the same assemblies.

    There are 2 types of slides for the PM series. One is the older blunt nose style, and the other is the new style with a taper on the front. Sorta looks like the CM slide up front.

    The old style slides take a 13 coil outer spring. The new (slightly longer) slides take a 15 coil spring.

    Kahr sent me a 15 coil spring with my Type 1 recoil assembly, and it worked awful until I cut 2 coils off the spring. Slide wouldn't lock back at all with the long spring.

    The type 1 & 2 recoil assemblies differ in the size of the rear flange (3/8" vs 1/2").

    PM recoil assemblies use an uncaptured outer recoil spring. MK recoil assemblies use a captured outer spring. Different system, and NOT interchangeable with PM assemblies.

    Here's a picture of the 3 types of PM assemblies, but it's tiny, and tough to see....


    Attached Images Attached Images

  3. #3
    Join Date
    Aug 2017
    Location
    KY
    Posts
    121

    Default

    Very Informative post Ed. I looked for a while for this information when I found a P9 slide and barrel on gunbroker. I almost bought it to put on my CW9 frame but after digging on the forum a while found it was the old flat nose type and used different recoil spring assembly.

    Again very nice to have this info on the forum. Thank you!
    Kahr MK9, Kahr CW9, Kahr P380, Kel-Tec P-3AT, Glock 17, Remington RM380, Sarsilmaz B6PC

    "People demand freedom of speech as a compensation for the freedom of thought which they seldom use."

  4. #4
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    27,265

    Default

    You'd just have to shorten the spring a coil or two and it would work. As I recall it's just long enough it won't work without shortening tiny bit.
    http://bawanna45.wix.com/bawannas-grip-emporium#!
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

    RIP Muggsy & TMan

  5. #5
    Join Date
    Mar 2015
    Posts
    17

    Default

    Any ideas why they changed the assemblies? I have a PM9 with the shorter slide and a new CM9 Tungsten. The difference in trigger pull and ease of slide tracking is very noticeable between the two with the older style feeling much better to me. Do the new pM9s feel better than their CM counterparts?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Xssights   Tommy Gun   Magnum Research new   CrossBreed Holsters