cw 380 mod😁

**kiki** · 04-07-2018, 04:50 PM

I honestly love my cw380!! This is not my first Kahr! I've been putting her through the paces and breaking her in... but it's such a small handgun and my large hands have a hard time gripping the slide. The cuts on the CW 380 are too shallow for me... so I decided to take a file and deepen the slide cuts! Very simple mod just take your time and do it right you can cut more on the left side of the slide than the right, due to the Striker reset is on the right side. BECAREFULL...RIGHT SIDE!!! also has extracter channel for springs! dont cut into hole😰!!! take a look at the pictures for me it makes a world of difference able to cock and hold and slingshot the slide without losing grip!!! After I finish putting her through her paces I plan to round off all the sharp corners and bead blast the slide flat matte stainless!!! If you're wondering what it would look like look at the pictures and look at the picture of the CM9 I rounded the corners and bead blasted the slide! Took a total of 1 hour being careful and it works great for me...little slide easy mod hope it helps someone else....😜😜😜