Crimsontrace   Xssights   Tommy Gun   Tommy Gun Shop
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 31

Thread: sig p365...a better look

  1. #1
    Join Date
    Dec 2011
    Posts
    146

    Cool sig p365...a better look

    shoot my p 365...loved it, except when time to clean😢....here we go
    took here completly apart! heres a look @ internals!!! heres the internal trigger assembly!!
    Attached Images Attached Images
    Last edited by kiki; 04-15-2018 at 04:39 PM.
    Why i carry?..."CAUSE I CAN"... :0)

  2. #2
    Join Date
    Dec 2011
    Posts
    146

    Default

    its easy to take apart! remove rear frame pin! its held in place inside frame with cotter pin! just knock out! right to left!
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  3. #3
    Join Date
    Dec 2011
    Posts
    146

    Default

    next...pull assembly from rear up! go slowly! unit held in place with rear pin and has a slot in front where assembly locks into!! what frame looks like empty....
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  4. #4
    Join Date
    Dec 2011
    Posts
    146

    Default

    next... take slide apart...there's a notch at the rear you push down and the rear plate is removed! Outcomes the striker assembly which looks very similar to a very beefed-up Glock Striker....
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  5. #5
    Join Date
    Dec 2011
    Posts
    146

    Default

    next... push down on the striker spring and remove the spring cups! I noticed something very similar the spring cups on the p365 look identical but much larger brother of the maritime spring cups for Glock enabling Glock to fire underwater makes me think if this was chosen? Not to shoot underwater but to make sure no debris gets in the channel and stops firing pin from moving?... look at complete atriker disassembled
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  6. #6
    Join Date
    Dec 2011
    Posts
    146

    Default

    next...look @ inside slide
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  7. #7
    Join Date
    Dec 2011
    Posts
    146

    Default

    next... for those wondering why you don't have to pull the trigger to remove the slide? I found that when you push down the slide takedown lever it automatically Cocks the connector/striker release down away from the striker... look at picture and see lower bar that goes to the rear
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  8. #8
    Join Date
    Dec 2011
    Posts
    146

    Default

    next... if you were wondering if the 12 round magazines were 10 round magazines with a plastic Mag extension adding more rounds? It turns out that sig designed a completely different magazine frame for the 12-round magazine!
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  9. #9
    Join Date
    Dec 2011
    Posts
    146

    Default

    next... clean her up put her back together in the reverse order the only thing I did not do is take apart the trigger assembly there's no need for that just simply clean it off and put it back into the frame! Be careful not to pull things apart little Springs may go flying
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

  10. #10
    Join Date
    Dec 2011
    Posts
    146

    Default

    btw... I also checked the brass for primer depth strikes....looks good
    Attached Images Attached Images
    Why i carry?..."CAUSE I CAN"... :0)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Mitch Rosen   Kahr Shop   CrossBreed Holsters   Magnum Research new