shoot my p 365...loved it, except when time to clean😢....here we go
took here completly apart! heres a look @ internals!!! heres the internal trigger assembly!!
shoot my p 365...loved it, except when time to clean😢....here we go
took here completly apart! heres a look @ internals!!! heres the internal trigger assembly!!
Last edited by kiki; 04-15-2018 at 04:39 PM.
Why i carry?..."CAUSE I CAN"... :0)
its easy to take apart! remove rear frame pin! its held in place inside frame with cotter pin! just knock out! right to left!
Why i carry?..."CAUSE I CAN"... :0)
next...pull assembly from rear up! go slowly! unit held in place with rear pin and has a slot in front where assembly locks into!! what frame looks like empty....
Why i carry?..."CAUSE I CAN"... :0)
next... take slide apart...there's a notch at the rear you push down and the rear plate is removed! Outcomes the striker assembly which looks very similar to a very beefed-up Glock Striker....
Why i carry?..."CAUSE I CAN"... :0)
next... push down on the striker spring and remove the spring cups! I noticed something very similar the spring cups on the p365 look identical but much larger brother of the maritime spring cups for Glock enabling Glock to fire underwater makes me think if this was chosen? Not to shoot underwater but to make sure no debris gets in the channel and stops firing pin from moving?... look at complete atriker disassembled
Why i carry?..."CAUSE I CAN"... :0)
next...look @ inside slide
Why i carry?..."CAUSE I CAN"... :0)
next... for those wondering why you don't have to pull the trigger to remove the slide? I found that when you push down the slide takedown lever it automatically Cocks the connector/striker release down away from the striker... look at picture and see lower bar that goes to the rear
Why i carry?..."CAUSE I CAN"... :0)
next... if you were wondering if the 12 round magazines were 10 round magazines with a plastic Mag extension adding more rounds? It turns out that sig designed a completely different magazine frame for the 12-round magazine!
Why i carry?..."CAUSE I CAN"... :0)
next... clean her up put her back together in the reverse order the only thing I did not do is take apart the trigger assembly there's no need for that just simply clean it off and put it back into the frame! Be careful not to pull things apart little Springs may go flying
Why i carry?..."CAUSE I CAN"... :0)
btw... I also checked the brass for primer depth strikes....looks good
Why i carry?..."CAUSE I CAN"... :0)