sig p365...a better look

[kiki]

shoot my p 365...loved it, except when time to clean😢....here we go
took here completly apart! heres a look @ internals!!! heres the internal trigger assembly!!

[kiki]

its easy to take apart! remove rear frame pin! its held in place inside frame with cotter pin! just knock out! right to left!

[kiki]

next...pull assembly from rear up! go slowly! unit held in place with rear pin and has a slot in front where assembly locks into!! what frame looks like empty....

[kiki]

next... take slide apart...there's a notch at the rear you push down and the rear plate is removed! Outcomes the striker assembly which looks very similar to a very beefed-up Glock Striker....

[kiki]

next... push down on the striker spring and remove the spring cups! I noticed something very similar the spring cups on the p365 look identical but much larger brother of the maritime spring cups for Glock enabling Glock to fire underwater makes me think if this was chosen? Not to shoot underwater but to make sure no debris gets in the channel and stops firing pin from moving?... look at complete atriker disassembled

[King Rat]

Nice gun. You say the trigger is similar to the 320? I have read, and I may be mistaken that the trigger is like a double action trigger, on the longer side with a 6.2 lb pull. Actually that is what I would prefer over a short crisp light trigger. Short reset would not personally matter to myself as I do not ride resets. It will be interesting to hear what others say about the trigger. Looks like a really nice gun and Congratulations! And thank you for taking the time to do the review.

[got2hav1]

Nice gun. You say the trigger is similar to the 320? I have read, and I may be mistaken that the trigger is like a double action trigger, on the longer side with a 6.2 lb pull. Actually that is what I would prefer over a short crisp light trigger. Short reset would not personally matter to myself as I do not ride resets. It will be interesting to hear what others say about the trigger. Looks like a really nice gun and Congratulations! And thank you for taking the time to do the review.

I would say the trigger is close to the feel of the 320. Not long stroke at all. There is a little bit of take up then you feel the wall , then it breaks. Reset is audible and short. I'll put my trigger gauge on it later and get back to you. Averaged 5 lbs. 10 oz. on the gauge. Sure feels less than that though.

[kiki]

next...look @ inside slide

[kiki]

next... for those wondering why you don't have to pull the trigger to remove the slide? I found that when you push down the slide takedown lever it automatically Cocks the connector/striker release down away from the striker... look at picture and see lower bar that goes to the rear

[kiki]

next... if you were wondering if the 12 round magazines were 10 round magazines with a plastic Mag extension adding more rounds? It turns out that sig designed a completely different magazine frame for the 12-round magazine!