Tommy Gun   CrossBreed Holsters   Magnum Research new   Tommy Gun Shop
Page 1 of 9 123 ... LastLast
Results 1 to 10 of 83

Thread: Sig P365... it’s true what they say

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2010
    Posts
    7,234

    Default Sig P365... it’s true what they say

    Well.... I can say I’m amazed. It’s true what they say about the P365. I had the opportunity to handle one yesterday and couldn’t leave without it.

    The the slide is the same width as a cm9 (.90 in.) and the frame is a tad thinner (.02 in.) as the Kahr frame bulges a little. Other dimensions with a mag in the pistol are so close it’s not worth mentioning any difference. Grip is excellent. Weight it slightly heavier by about 2 oz. more with an empty mag. If this thing runs good and holds up to shooting like my Kahr I’ll be without words...


    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  2. #2
    Join Date
    Sep 2011
    Location
    Central MN
    Posts
    4,172

    Default

    Welcome to the club. It is a very, very interesting firearm. Try it in your PM9 holsters. It fits perfectly in every one of mine.
    "Never pet a burning dog"

  3. #3
    Join Date
    Sep 2010
    Posts
    7,234

    Default

    Quote Originally Posted by 340pd View Post
    Welcome to the club. It is a very, very interesting firearm. Try it in your PM9 holsters. It fits perfectly in every one of mine.
    Yep, it’s incredible it fits them all, even the kydex. I actually have an older stiff leather holster for the cm9 and the Sig is looser than the Kahr.

    I’m thinking about getting one of these:
    https://kusiakleather.com/products/kusiak-iwbs

    Need to get me a DeSantis Nemmis dedicated to this too for pocket carry. It deserves its own holsters. If it wasn’t for mowing the grass I could have shot it today.

    Here’s the worst part. When I brought it home yesterday the wife saw it and said I should have got 2 of them. I tried to get her to go with me but she didn’t. I can see now if she shoots it and likes it I’ve lost it as supply has all dried up again....
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  4. #4
    Join Date
    Oct 2010
    Location
    Jax, Fla
    Posts
    5,602

    Default

    I hear the trigger is similar to a Kahr.

    Maybe NOW Justin will start thinking about a double stack? Hmm???

  5. #5
    Join Date
    Sep 2010
    Posts
    7,234

    Default

    Quote Originally Posted by JohnR View Post
    I hear the trigger is similar to a Kahr.

    Maybe NOW Justin will start thinking about a double stack? Hmm???
    The trigger to me seems like a cross between a XD and a glock. The sights are nice. The front sight jumps out at you.
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  6. #6
    Join Date
    Oct 2009
    Posts
    4,756

    Default

    I've got the hots for one of these bad...Still haven't been able to find one to check out yet...My only reservations are about the problems they had at first but it seems they have those issues under control...I pocket carry and was wondering about the width at the bottom of the magazine that prints in jeans, is it much wider there than a PM9?....As much as I love my PM9 I really like having more ammo in the gun ready to go rather than possibly having to fumble with a reload....All in all this seems like the best of both worlds with size vs ammo capacity....Hope to fondle one soon..

  7. #7
    Join Date
    Sep 2010
    Posts
    7,234

    Default

    Quote Originally Posted by getsome View Post
    ..I pocket carry and was wondering about the width at the bottom of the magazine that prints in jeans, is it much wider there than a PM9?..
    Bottom of grip/mag measurements
    Side to side:
    cm9/pm9 = .90 in.
    P360 = .98 in.

    Front to rear
    cm9/pm9 = 1.91 in.
    P380 = 1.73 in.
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  8. #8
    Join Date
    Oct 2009
    Location
    Gwinnett County, Georgia
    Posts
    3,475

    Default

    I was thinking about one, but decided I didn't want a SIG without a hammer or the DA/SA trigger.

  9. #9
    Join Date
    Jan 2012
    Location
    south east Michigan
    Posts
    2,155

    Default

    yqtszhj, Just face it you're in love with the sweet little sig.

    Quote Originally Posted by yqtszhj View Post
    Bottom of grip/mag measurements
    Side to side:
    cm9/pm9 = .90 in.
    P360 = .98 in.

    Front to rear
    cm9/pm9 = 1.91 in.
    P380 = 1.73 in.

  10. #10
    Join Date
    Jun 2017
    Posts
    1,426

    Default

    Quote Originally Posted by yqtszhj View Post
    Bottom of grip/mag measurements
    Side to side:
    cm9/pm9 = .90 in.
    P360 = .98 in.

    Front to rear
    cm9/pm9 = 1.91 in.
    P380 = 1.73 in.
    Interesting, I reported a test review that my club did a few months back. I posted on this forum. One thing I did not care for was the light striker fired trigger. Especially for a EDC firearm. I will say I shoot a lot of DAO. And I love the trigger on my both my Kahr CW380 and my Nano 9mm. Smooth, deliberate all the way through. One member of another forum who is very experienced shooter and a big fan of the Sig 365 said "Not sure if I like the trigger on the 365 for carry". I understand that triggers are subjective, but Kahr owners should be very proud of their tiggers. Aways highly praised.

    Well after shooting a 1,000 rds though the 365. Which by the way is a lovely firearm. I made a decision to go and buy the Kahr CM9 which I just purchased today. If it is anywhere near as reliable, and smooth shooting as my Nano, I will be one very happy owner.

    PS As some of you know, Kahr now has a $45.00 rebate.

    I love the small guns. Looking forward to adding the CM to the others I own. the only one that is not a DAO is the Ruger LC9S which I no longer EDC as the trigger just became too light. It was down to 4lbs of pull, and did not like the fast break. That was when I found the Nano and never looked back.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Crimsontrace   Kahr Shop   Xssights   Mitch Rosen