Crimsontrace   Mitch Rosen   CrossBreed Holsters   Magnum Research new
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Hey Ed M, look what I did...

  1. #1
    Join Date
    Sep 2010
    Posts
    5,753

    Default Hey Ed M, look what I did...

    Well, I did it today.


    I traded this


    For this



    Needs a little TLC and some CGW parts and it will be good to go.
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  2. #2
    Join Date
    Apr 2013
    Location
    Wisconsin
    Posts
    4,160

    Default

    A fine trade.............from the dark side, back to reality. I'm proud of you. Wouldn't mind one of those myself.

  3. #3
    Join Date
    Jun 2014
    Location
    Upstate, South Carolina
    Posts
    725

    Default

    Nice, I would have done that too.
    NRA Benefactor

  4. #4
    Join Date
    Jun 2014
    Location
    Upstate, South Carolina
    Posts
    725

    Default

    Nice, I would have done that too.
    NRA Benefactor

  5. #5
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    27,604

    Default

    OK for us CZ challenged folks, is that the Rami? Can't make the picture big enough to tell for sure.

    I would have done that too, whatever it is.
    http://bawanna45.wix.com/bawannas-grip-emporium#!
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

    RIP Muggsy & TMan

  6. #6
    Join Date
    Oct 2009
    Location
    Gwinnett County, Georgia
    Posts
    3,312

    Default

    I always recommend a move from Glock to anything else!

  7. #7
    Join Date
    Sep 2010
    Posts
    5,753

    Default

    Yeah, thatís the Rami decocker. Got it for an even trade. I got a deal on that G26 last fall so Iím into the Rami for cheap (relatively speaking.) A higher resolution pic below. It cleaned up real nice too. Looks like it wasnít shot much.

    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  8. #8
    Join Date
    Jan 2010
    Location
    Twin Cities MN.
    Posts
    3,448

    Default

    Very nice!!!!
    "Life Member NRA"
    I am addicted to brake fluid...don't worry I can STOP at anytime!

  9. #9
    Join Date
    Aug 2016
    Posts
    532

    Default

    Quote Originally Posted by yqtszhj View Post
    Well, I did it today.


    I traded this


    For this



    Needs a little TLC and some CGW parts and it will be good to go.
    Congratulations!!!

    Woohoo! You're gonna love this one. REALLY good shooter.

    Mine had issues with the 14 round mag. Failure to feed - rounds just jammed against the bottom of the feed ramp.

    Had to replace the mag springs with Wolff +5% springs for a full size CZ 75, and that took care of it.

    You'll probably want the pinkie extension for the 10 rd mag too.

    https://www.ebay.com/itm/CZ-2075-Ram...sAAOSwqrtWpYzX

  10. #10
    Join Date
    Sep 2010
    Posts
    5,753

    Default

    Quote Originally Posted by Ed M View Post
    Congratulations!!!

    Woohoo! You're gonna love this one. REALLY good shooter.

    Mine had issues with the 14 round mag. Failure to feed - rounds just jammed against the bottom of the feed ramp.

    Had to replace the mag springs with Wolff +5% springs for a full size CZ 75, and that took care of it.

    You'll probably want the pinkie extension for the 10 rd mag too.

    https://www.ebay.com/itm/CZ-2075-Ram...sAAOSwqrtWpYzX
    Range repeort:
    200 rounds and the only issues were with the 14 round magazine. As you said the 14 round springs are weak. I had the same issues you did so a spring is in order and you could tell it was weak when loading the mag. The 10 round mag ran flawless.

    I think the guy traded because it had a few little issues that needed addressing that maybe he couldnít fix. First was the 14round mag I guess. Then the front site wasnít centered so it shot to the left. It was like that from the factory because you could see the stake marks on the sight and slide so the rear sight was all the way to one side to compensate. I drifted it to the center so it outta be good now. The trigger pin wasnít flaired well so it would drift a bit. Fixed that now itís a non issue. And the grip bushings needed another half turn so the grips would sit flush. You could see where he fudged the head of one of the grip screws trying to get it flush to no avail. I actually like the factory rubber grips. Theyíre real easy to keep a hold on to.

    I got awarded a Visa gift card so Iím thinking that the perfect use for it would be a few Cajun gun works parts, in particular the 85C combat trigger, floating trigger pin, and maybe the Rami lighter spring kit. Those items and a polish job on the internals while itís apart and it should feel like a custom pistol.

    That was one of the best trades Iíve made in a long time.
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Xssights   Kahr Shop   Tommy Gun   Tommy Gun Shop