New P45

[hardknocks1]

Hello
The kimber pro tac mag is flush fit for easier concealment while adding an extra round, may need to be tweaked a bit lots of threads on the subject.

[oldjarhead]

Hey Hardnocks1, Haven't shot the P45 yet, but the springs in the mags were stiff alright. Had to use my Magula upula loader. I got the rounds loaded okay, but the springs are so stiff, I can only see the bullets "load holes" on the side down to about the fourth hole, and the last two or three holes the bullets don't go down that far. Is this normal for new P45 mags? Thanks.

[hardknocks1]

Don't seem normal if you can't fit 6 rounds.
I loaded all the mags and let them sit
Also locked back slide for a few days which helped
Others here will know more.
Regards
Mike

[hardknocks1]

The kim pro tac mag works but don't lock slide back on empty mag when shooting, but locks back when not shooting.
Also feed ramp is taking a beating @ the bottom.

[hardknocks1]

Cleaned up the feed ramp near the bottom then removed some metal from front of mag it should not hit the feed ramp now.