Mitch Rosen   Tommy Gun Shop   Magnum Research new   Xssights
Results 1 to 7 of 7

Thread: CM 9 magazine release probblem

  1. #1
    Join Date
    Sep 2011
    Location
    Central Iowa
    Posts
    44

    Default CM 9 magazine release probblem

    I recently bought a new CM 9 and from the start the magazine release will barely release the magazine. What's the best fix for this annoying problem?

  2. #2
    Join Date
    Jul 2016
    Posts
    249

    Default

    I did the following to get relief from the same issue; polished the snot out of the mag bodies with 600 then 900 grit paper, polished w/ Flitz, include the notch in the mag body engaged by the mag release, drilled/taped release button for a 8/32 sight base screw for button extension. these were competition driven mods that have proven themselves in matches and EDC. mags drop like they were shot (pun?) and no clearance problems with PJ's IWB or freestyle,strong/weak hand shooting.
    I would do the same mods if I ever get another CM9

    NRA LIFER
    IDPA BELEIVER

  3. #3
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    32,469

    Default

    If it's the drop that's lagging as bugs mentioned, sometimes just gently squeezing the mag up top near the feed lips helps. Just a tiny bit.
    I usually polish the mags as well and was them with car paste wax occasionally.

    If it's the mag release button itself, adding to the release would help or you might check for roughness on the spring or mag cut outs.
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

    RIP Muggsy & TMan

    "If you are a warrior legally authorized to carry a weapon and you step outside without that weapon, then you become a sheep, pretending that JOCKO will not come today."

  4. #4
    Join Date
    Sep 2011
    Location
    Central Iowa
    Posts
    44

    Default

    Thanks friends I'll take your advice starting with the polish job.

  5. #5
    Join Date
    Nov 2011
    Location
    Kalamazoo, MI
    Posts
    979

    Default

    This fix helped mine: http://www.kahrtalk.com/showthread.p...ezing-9mm-mags Polished and waxed the magazines and Bob's yer uncle.
    Last edited by gb6491; 06-14-2018 at 05:28 PM. Reason: Fix link

  6. #6
    Join Date
    Sep 2011
    Location
    Central Iowa
    Posts
    44

    Default

    Linky no open.

  7. #7
    Join Date
    Nov 2011
    Location
    Kalamazoo, MI
    Posts
    979

    Default

    Quote Originally Posted by cardguy View Post
    Linky no open.
    Does here... Copy and paste to Google I guess. It's essentially about squeezing the mag lips a few thousandths. I used a small woodworking clamp.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
CrossBreed Holsters   Tommy Gun   Kahr Shop   Crimsontrace