CrossBreed Holsters   Tommy Gun Shop   Crimsontrace   Kahr Shop
Results 1 to 7 of 7

Thread: Pocket, IWB, OWB for PM9 + Lasermax CF Laser

  1. #1

    Default Pocket, IWB, OWB for PM9 + Lasermax CF Laser

    I have a Nemesis and unknown kydex holster for my PM9 that I've had for a decade, and finally decided to slap a Lasermax CF laser on the PM9.

    So now I'm looking to buy three new holsters, and would like recommendations for IWB, OWB, and pocket carry that will fit the laser.

  2. #2
    Join Date
    Jul 2016
    Posts
    198

    Default

    PJs Holsters for IWB/OWB , C3 Tactical for pocket carry; all three are kydex. I use the PJ holster IWB for carry or wear it OWB (they will bend the lip to hook over belt) for competition(CM9) mostly,and sometimes for carry. I use the C3 for pocket carry;being kydex, it's not too slippery for most pockets. I would buy them again if the need would arise.

    NRA LIFER

    IDPA BELIEVER

  3. #3

    Default

    Thank you, I see the PJ has an option for laser, but the C3 tactical for pocket does not.

    My concern with the PJ is that I'm in 100oF weather right now, and a IWB would probably sweat and cause a rust concern.

    I did stumble across whitehatholsters that comes with a horsehide sweat shield hybrid with kydex that is PM9 lasermax compatible, and for pocket I found a Nemesis model M44BJU2Z0 that again is supposed to be PM9 + laser capable. I can't vouch for either though, as I've seen neither in person.

  4. #4
    Join Date
    Jul 2016
    Posts
    198

    Default

    I sweat with the best of them; never had a sweat induced rust problem with my CM9 from any of the holsters I use, even when dew points reach 70-90 in WI.. IMHO, short of falling off the dock, rusting due to perspiration is a non-issue.

    NRA LIFER

    IDPA BELIEVER

  5. #5

    Default

    If you would entertain a question, does the Lasermax CF hold its zero on your PM9 after pocket carry? What size groups are you holding at what distance?
    Thanks


    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Jul 2016
    Posts
    198

    Default

    Quote Originally Posted by JAA View Post
    If you would entertain a question, does the Lasermax CF hold its zero on your PM9 after pocket carry? What size groups are you holding at what distance?
    Thanks


    Sent from my iPhone using Tapatalk
    FWIW, I had a Lasermax on my CM9 for a short time before I changed to TFO sights (milled a front dovetail) and took off the laser because I could see the sights so well; not due to anything with the laser which I still have. I had sighted the laser @75ft., groups where about 2-3" w/freestyle grip, benched. I did not see any POI changes using the laser during my drills while it was carried. IHO, group size is determined by how steady your hold, how you break the shot, and by distance.

    NRA LIFER

    IDPA BELIEVER

  7. #7

    Default

    Thanks for the detailed info. My eyes arenít what they were and looking for an easy aiming devise. Iíve been thinking about a laser for my PM9 but wavering due to concerns about it holding a zero in a pocket holster with all the movement involved in ones daily activities.
    Thanks again.



    Sent from my iPhone using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Xssights   Magnum Research new   Mitch Rosen   Tommy Gun