Mitch Rosen   Crimsontrace   Magnum Research new   Tommy Gun
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: PM9 fails pencil test

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2010
    Posts
    18

    Default PM9 fails pencil test

    This morning I dis assembled my 15 year old PM9's slide to clean out the crud & oil (first time doing this). Now upon re assembly it won't pass the pencil test. It won't even make the pencil move. Assembly went smoothly so any suggestions?

  2. #2
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    31,216

    Default

    The striker must not be in there correctly. Can you push down on the drop safety and move the striker forward and backward. Forward enough to protrude from the bolt face?

    You should be able to push down that safety and shake the slide and it should rattle.

    I can't think of any way to put the striker in wrong, I'm stumped but pondering.

    You have a good square firm eraser so the striker has something good to hit. Or use a new unsharpened pencil and put the front end down.
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

    RIP Muggsy & TMan

    "If you are a warrior legally authorized to carry a weapon and you step outside without that weapon, then you become a sheep, pretending that JOCKO will not come today."

  3. #3
    Join Date
    Sep 2010
    Posts
    18

    Default

    I can push down on the drop safety and move the striker far enough to protrude from the bolt face. I just did an experiment, I sized and primed an empty case, chambered it and fired it with no problem! I'm perplexed. I did try a new unsharpened pencil and it still failed. I won't be able to get to the range till later this week to test with live ammo. Thank you for your response!

  4. #4
    Join Date
    Feb 2018
    Posts
    1,138

    Default

    If it fired the primer, unless you plan on loading it with pencils you're probably good to go. But do post back about how it runs at the range.

  5. #5
    Join Date
    Sep 2010
    Posts
    18

    Default

    That's what I figured as well. Perplexing though because before I took it apart it passed the pencil test. I'll post results after my range trip.

  6. #6
    Join Date
    Mar 2012
    Posts
    1,484

    Default

    I HAD A WHOLE DIFFERENT IMAGE WHEN YOU MENTIONED "PENCIL TEST "
    "If we ever forget we are one nation under God, then we will be a nation gone under." Ronald Reagan

  7. #7
    Join Date
    Jan 2010
    Location
    Twin Cities MN.
    Posts
    4,733

    Default

    Quote Originally Posted by GROTMAN View Post
    I HAD A WHOLE DIFFERENT IMAGE WHEN YOU MENTIONED "PENCIL TEST "
    Then we also need to see the erasers....
    "Life Member NRA"
    I am addicted to brake fluid...don't worry I can STOP at anytime!

  8. #8
    Join Date
    Sep 2010
    Posts
    6,695

    Default

    Quote Originally Posted by GROTMAN View Post
    I HAD A WHOLE DIFFERENT IMAGE WHEN YOU MENTIONED "PENCIL TEST "
    This picture makes me miss Itxi. So in remembrance I’ll just say, “boob$ too big.”
    The only thing better than having all the guns and ammo you'd ever need would be being able to shoot it all off the back porch.

    Want to see what will be the end of our country as we know it???
    Visit here:
    http://www.usdebtclock.org/

  9. #9
    Join Date
    Sep 2010
    Posts
    18

    Default


  10. #10
    Join Date
    Sep 2010
    Posts
    18

    Default

    All is well! My range trip today verified that my PM9 is as reliable as it ever was!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Kahr Shop   Tommy Gun Shop   Xssights   CrossBreed Holsters