Tommy Gun Shop   Kahr Shop   Mitch Rosen   Magnum Research new
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Leupold Deltapoint Micro mount!

  1. #11
    Join Date
    Feb 2023
    Posts
    6

    Default

    I made my adapter to be a press fit, and I put a little bit of red Loctite on it, just in case.

  2. #12
    Join Date
    Feb 2023
    Posts
    6

    Default

    There's no reason to dismount the sight unless you have to get in to replace the striker spring or something of that nature. You do have to unscrew the battery cover to strip the slide off of the frame, but that has no effect on your zero.

  3. #13
    Join Date
    Feb 2023
    Posts
    6

    Default

    The DPM doesn't sit in the usual kind of slide cut like the usual MRO sights do. The way it's designed is to replace the rear sight with a mounting block that the DPM attaches to, which pulls the DPM down to the surface of the slide, and pulls the block up in the dovetail to lock it in place. I made a new mounting block to fit the sight cut on the old-style Kahr slide. I like it because it's both cheaper than getting the slide milled for a normal MRO, and 100% reversible if I want to go back to irons.

  4. #14
    Join Date
    Jun 2020
    Posts
    206

    Default

    Quote Originally Posted by Bearddevil View Post
    The DPM doesn't sit in the usual kind of slide cut like the usual MRO sights do. The way it's designed is to replace the rear sight with a mounting block that the DPM attaches to, which pulls the DPM down to the surface of the slide, and pulls the block up in the dovetail to lock it in place. I made a new mounting block to fit the sight cut on the old-style Kahr slide. I like it because it's both cheaper than getting the slide milled for a normal MRO, and 100% reversible if I want to go back to irons.
    This may be the second best reason to do this, IMO. I think. What I'd like to see now, is how well you can shoot the pistol with the DPM turned off - essentially using it as a ghost ring.

  5. #15
    Join Date
    Nov 2010
    Location
    SE Michigan
    Posts
    681

    Default

    Question, I clean after every range session regardless of number fired. I strip down the slide. So are the hold down screws blue locktited?

  6. #16
    Join Date
    Nov 2010
    Location
    SE Michigan
    Posts
    681

    Default

    Great news the two mounting screws donít need to be blue lock tite. So removal to strip the top end should not be a problem.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Xssights   Tommy Gun   Crimsontrace   CrossBreed Holsters