Magnum Research new   Tommy Gun Shop   Kahr Shop   Crimsontrace
Results 1 to 4 of 4

Thread: CM9 and Night Sights?

  1. #1
    Join Date
    Feb 2011
    Location
    San Ramon, CA
    Posts
    58

    Exclamation CM9 and Night Sights?

    Hi All,

    Has anybody installed the Trijicon NS on a CM9 yet and if so how easy was it to do, and do you have to modify anything or they just drop in so to speak? Also, are the Trijicon's the only ones available?.....

    Thks Enrico
    KAHR CM-9 (9mm)
    CZ SP-01 (9mm)
    RUGER LCR (357 Mag)
    FNH FS-2000 (5.56mm)
    RUGER MINI-14 RANCH (.223)

  2. #2
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    22,186

    Default

    All the ones for the CW series work. Dawson Precision makes some very good ones. Jocko posted a thread yesterday where a guy put some fiber optics on one.
    They are relatively easy to install the front. I know Dawson comes with everything you need and instructions. Not as familiar with the others. You don't have to replace the rear in some cases depending on what you want. The rear can be quite tight and very difficult to remove. Might be worth a trip to the sight manufacturer or Kahr or a good smith for the back if you've not been there before.
    Due to the substantial increase in ammo cost you can no longer expect a warning shot!
    * * * * *
    Alcohol Tobacco and Firearms should be a convenience store, not a government agency.
    Forget the Alamo, "Remember America"I'm a devout American
    http://bawanna45.wix.com/bawannas-grip-emporium#!
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

  3. #3
    Join Date
    Feb 2011
    Location
    San Ramon, CA
    Posts
    58

    Default

    I did't know that Jaco is on the LCP forum. I installed the XS on my LCR and they a great at night. The one they show on the LCP forum are DP's day sights. They do have NS but more expensive then the Triji.
    So, it sounds like the rear needs to be install by a pro shop!

    Thanks for the thread, Enrico.
    KAHR CM-9 (9mm)
    CZ SP-01 (9mm)
    RUGER LCR (357 Mag)
    FNH FS-2000 (5.56mm)
    RUGER MINI-14 RANCH (.223)

  4. #4
    Join Date
    Feb 2011
    Location
    San Ramon, CA
    Posts
    58

    Default

    more.......I ran into this thread and it explains it...thank you!

    http://kahrtalk.com/showthread.php?t=6365

    Thkx
    KAHR CM-9 (9mm)
    CZ SP-01 (9mm)
    RUGER LCR (357 Mag)
    FNH FS-2000 (5.56mm)
    RUGER MINI-14 RANCH (.223)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Mitch Rosen   Xssights   CrossBreed Holsters   Tommy Gun