Mitch Rosen   CrossBreed Holsters   Magnum Research new   Crimsontrace
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: What brand of .45 bullets do ya'll prefer?

  1. #11
    Join Date
    Oct 2010
    Location
    Just this side of going around the bend
    Posts
    2,664

    Default

    Melissa

    These are the people that I get my lead bullets from www.friendswoodbullet.com . Looks like they went up a bit in price but still good bullets. LSW 200 grain 500 for $37.75, RNL 230 grain 500 for $38.24. Their shipping is $15.00 flat rate for I believe up to 60 pounds.

    I really like the nice clean holes of the LSWs. I'm using 4.3 grains of Bullseye and setting OAL at 1.245". You just want to be about a finger nails' thickness from the shoulder of the bullet. Not a screamer load but real good for target work. Use your barrel to check overall length. They should "plop" in and be flush with the barrel hood.

    Good luck
    On the internet, the number of posts do not correlate to actual knowledge.
    The notch is supposed to be there as well as the bulge at the front of the frame!
    You can't stop insane people from doing insane things by passing insane laws.






  2. #12
    Join Date
    Feb 2010
    Location
    CA
    Posts
    4,070

    Default

    Update: The bullets I buy locally are made by X-Treme Bullets They were originally Western Nevada / West Coast Bullet Inc. and were sold a couple times. Their 230gn plated 45 are listed at $70.50 shipped for 500. The last I bought locally were about $63.
    •"Everything will be okay in the end. If it's not okay, it's not the end." - O. L.
    • "America's not at war; her military is. America's at the mall."

  3. #13
    Join Date
    Mar 2010
    Location
    Northwest
    Posts
    1,320

    Default

    My fav fmj supplier has been mentioned but if you can tolerate the lube and smoke lead will work too.

    Best cast online:
    http://www.missouribullet.com/index.php
    MBC ships within minutes of ordering.

    2nd best:
    http://www.pennbullets.com/

    Always wanted to try these:
    http://www.dardascastbullets.com/

    just sayin'
    Tilos

  4. #14
    Join Date
    Nov 2010
    Location
    SE Michigan
    Posts
    753

    Default

    I know very little about reloading, but had a guy at my LGS load some .45 acp to punch holes with the PM45. He used Winchester WST and Berrys plated 45 Cal 185gr HBRN. WOW!, I can't believe how accurate and soft recoil. At 25' I can put most in the same hole. Makes it more fun to shoot.

  5. #15
    Join Date
    Feb 2020
    Location
    N.E. Ohio
    Posts
    363

    Default

    Been using these for awhile. Good quality, priced fairly. https://www.bobsbullets.net

    Try his 160gr 45. Light charge of BE. You will have to lighten your recoil spring. Accurate, cheap Bullseye round.
    Last edited by Canine Dave; 04-01-2020 at 07:53 AM. Reason: fix web address

  6. #16
    Join Date
    Apr 2012
    Posts
    1,114

    Default

    I like the polymer coated lead bullets. Less mess than wax coated lead. Cheaper than plated bullets (last time I looked) OK for use in polygonal barrels.

  7. #17
    Join Date
    Nov 2010
    Location
    SE Michigan
    Posts
    753

    Default

    Berry’s plated. I’ve loaded a few thousand Acme red coated and they shoot equal to Berry’s just more smoke. The cost being equal I’ll stick with Berry’s. The Bayou green also shoot very well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Tommy Gun   Tommy Gun Shop   Kahr Shop   Xssights