partially right, some followers will ride past the mag release button if some contact is made BUT there should be no contact if everything is right. as a magazine spring weakens, it is far easier then for that follower to jam up. It only takes a split second for the complete timing of the gun to be off and ftf's to occur. The slightest hesitation of that follower to not produce that next round up where it belongs is what has been causing SOME to have issues with the 2 and 3rd round. If one is not having any feed issues with round 2 and 3, then u can assume the follower is going past that magaazinecut out hole with no restriction..