It seems that the polishing may have worked there was one feeding problem right at the start after the polishing, but now with over 150 rounds through it no more problems thus far!
Senior Member
It seems that the polishing may have worked there was one feeding problem right at the start after the polishing, but now with over 150 rounds through it no more problems thus far!
KahrTalk 1K Member
Congratulations! Glad you stuck with it and succeeded!Originally Posted by cmichael22
It would be so nice if something made sense for a change.
-- Alice in Lewis Carroll's Alice's Adventures in Wonderland
Junior Member
Hi All, I'm new to the forum and also have PM40 that had feeding problems since I bought it (used). I found this forum and the spring deal, took it apart, and it was bent. I bent it back as the pic shows (great pic) and it now hand cycles with no issues. I'm going to bring it to the range tomorrow to see if this indeed solved the problem, though I am pretty confident it did. I'm so glad I found this forum, this was very frustrating. I really like the feel of the gun. I'll update ya'll on if this solved the problem, but I just wanted to say "hi" and give a very hopeful "thanks" for this info, and those great pics.
Reply With Quote
