Mag Release

FMF4 · #1 09-21-2009, 07:43 PM

I have a PM9 with a very sensitive mag release button, it takes very little pressure to release the magazine. I carry it in a Don Hume IWB holster and constantly have to push the mag back into the magazine well because it has been slightly ejected. Has anybody else experienced similar issues?

ltxi · #2 09-21-2009, 08:20 PM

Don Hume IWB exposes the mag release button a bit more than my Alessi, Mitch Rosen, or newly acquired De Fatti holsters.....but I've had no problem with inadvertant mag release with it.

Dietrich · #3 09-22-2009, 04:30 AM

I`ve never had a problem with the magazine release either. Is it a problem all the time or just when you holster it?

jocko · #4 09-22-2009, 06:35 AM

Quote:

Originally Posted by FMF4

I have a PM9 with a very sensitive mag release button, it takes very little pressure to release the magazine. I carry it in a Don Hume IWB holster and constantly have to push the mag back into the magazine well because it has been slightly ejected. Has anybody else experienced similar issues?

SHOULD NOT BE HAPPENING. My bet isyou have a bad out os spec mag release. I would call kahr and they wills end you a new release, and also ask for a new mag release spring also. . take the slide off and with a long nose needle pliers you can installthat mag release in aobut 5 minutes - tops...

rock · #5 09-22-2009, 07:25 AM

I had a similar problem a number of years ago. Kahr sent me a heavier spring. You can also try a spring from a 1911 as well. I have one in one of mine and it works great.

jocko · #6 09-22-2009, 12:03 PM

karh says there is no "heavier" spring..Their metal mag release has a little longer lip on it, there fore grabbing into the magazine opening further, there fore causing one to push in the mag release button further to release, giving the impression of a heavier spring but in reality NOT.

FMF4 · #7 09-22-2009, 03:21 PM

It is a problem all the time whether it is in the holster or not, the slightest pressure on the magazine release and it ejects the mag.
I emailed Kahr and the tech said that either the magazine catch is slightly out of spec or the spring is weak. He said that he would mail those items out to me right away.
thank you for the responses.

jocko · #8 09-23-2009, 01:50 AM

Quote:

Originally Posted by FMF4

It is a problem all the time whether it is in the holster or not, the slightest pressure on the magazine release and it ejects the mag.
I emailed Kahr and the tech said that either the magazine catch is slightly out of spec or the spring is weak. He said that he would mail those items out to me right away.
thank you for the responses.

will solve ur problem..

#9 09-25-2009, 10:59 PM

Quote:

Originally Posted by rock

I had a similar problem a number of years ago. Kahr sent me a heavier spring. You can also try a spring from a 1911 as well. I have one in one of mine and it works great.

1911 spring is quite different from a PM9 mag release spring. How were you able to install it?

I sanded the button so that less of it protruded. no more inadvertent mag drops.

Cappy · #10 09-26-2009, 04:34 PM

Have had no problem with mine. Must be something off spec.