Go Back   KahrTalk Forums > Kahr Firearms Sub-Forums > K Series Pistols

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 01-21-2011, 07:45 PM
cynergyou cynergyou is offline
Junior Member
 
Join Date: Sep 2009
Posts: 9
Default K9 Ejector Question

Hi All,

I have a Kahr K9 ejector that I bought brand new a couple of years ago. It is my third K9 that I've owned. It has been very reliable - no failures to feed or fire yet (knock on wood).

The one thing that I have noticed is that the ejection pattern of my Kahr K9 is sometimes inconsistent. Most of my empties fly out to the right and rear of the gun. However, I sometimes get the occasional casing that bounces straight back at me.

I've read a suggestion on this board to try a heavier recoil spring. I haven't tried the heavier recoil spring yet (I'm still using the standard weight springs - i think they are 20 pounders). I plan to buy some heavier weight Wolff recoil springs and test them out in my gun.

However, I noticed that my ejector on my K9 has a little bit of play in it. I can wiggle it up and down slightly, and side to side as well. Is this normal? Does the ejector on your K9 have some play to it or is it fixed tight?

My ejector only has some slight play in it. It's not much, but I was wondering if this might be the cause of the occasional erratic ejection.

Thanks in advance!

Cynergyou
Reply With Quote
  #2  
Old 01-22-2011, 05:50 AM
ripley16's Avatar
ripley16 ripley16 is online now
KahrTalk 1K Member
 
Join Date: Sep 2009
Location: Virginia
Posts: 2,052
Default

The ejector in my K9 has some slight movement as well.
__________________
"Corpseman?" Corpseman! Who looks stupid now, "The Decider" or "The One"?

Last edited by ripley16; 01-22-2011 at 07:13 AM.
Reply With Quote
  #3  
Old 01-22-2011, 06:24 AM
PaiN's Avatar
PaiN PaiN is offline
Senior Member
 
Join Date: Nov 2009
Location: CT, USA
Posts: 505
Default

I'm going to shoot this weekend, I'll report back on mine after I strip it for cleaning.
__________________
-The Destroyer Approaches
eyes to the south
Reply With Quote
  #4  
Old 01-22-2011, 06:25 AM
cynergyou cynergyou is offline
Junior Member
 
Join Date: Sep 2009
Posts: 9
Default

Thanks Ripley. I guess a little play is even necessary. I skimmed the user manual last night and reread the part that says to push down the tip of the ejector when reinstalling the slide to avoid hitting the ejector with the slide.
Reply With Quote
  #5  
Old 01-22-2011, 06:32 AM
jocko's Avatar
jocko jocko is offline
Perpetual New Guy
 
Join Date: Sep 2009
Posts: 343
Default

Quote:
Originally Posted by cynergyou View Post
Hi All,

I have a Kahr K9 ejector that I bought brand new a couple of years ago. It is my third K9 that I've owned. It has been very reliable - no failures to feed or fire yet (knock on wood).

The one thing that I have noticed is that the ejection pattern of my Kahr K9 is sometimes inconsistent. Most of my empties fly out to the right and rear of the gun. However, I sometimes get the occasional casing that bounces straight back at me.

I've read a suggestion on this board to try a heavier recoil spring. I haven't tried the heavier recoil spring yet (I'm still using the standard weight springs - i think they are 20 pounders). I plan to buy some heavier weight Wolff recoil springs and test them out in my gun.

However, I noticed that my ejector on my K9 has a little bit of play in it. I can wiggle it up and down slightly, and side to side as well. Is this normal? Does the ejector on your K9 have some play to it or is it fixed tight?

My ejector only has some slight play in it. It's not much, but I was wondering if this might be the cause of the occasional erratic ejection.

Thanks in advance!

Cynergyou
My K9 ejector has up and down play and side play. not alot either way but it is there. What you are seeing is normal. That ejector is pinnedina the back and play is going to happen. It willharm nothing and that is also whykahr recommends sometimes to push downon the ejector when reinstalling the slide.

I have the 22# recoil springs in my K9 and love um. I still will get at times a roundin the head. That could be possable a lighter loaded round, or recoil springs that need changed or just one of those things. Sometimes it is the shooter positioning also. A lefty might get more in his head than a rithgy to. I being a lefty can certify that at times. I bet round sin the head from my G19 more than I do any of my kahrs and I kinda attribute that to being left handed, as my brother when he shoots is clear of them.

It was a good question to ask and hopefully you willbe more at peace with the K9 now. If it isn't the finest 9mm on the market in all steel, it is in the top 3 IMO.

There is nothing wrong with your K9, Just shoot it like u stole it.

by the way yourkahr K9 came with 20# factory recoil springs. If I was u I would order from wolffs the 22# and try um ech to see if either one makes any difference as to where the casing fly.

gunsprings.com will get u to wolffs.
__________________
. My PM9 has over 32,000+ rounds through it, and runs much better than an illegal trying to get across our border


NRA ENDOWMENT LIFE MEMBER
Reply With Quote
  #6  
Old 01-22-2011, 06:52 AM
kpm9's Avatar
kpm9 kpm9 is offline
Senior Member
 
Join Date: Sep 2009
Location: Texas
Posts: 325
Default

Shoot enough and that will happen with any gun. That is why I wear eye protection.
Reply With Quote
  #7  
Old 01-22-2011, 07:16 AM
ripley16's Avatar
ripley16 ripley16 is online now
KahrTalk 1K Member
 
Join Date: Sep 2009
Location: Virginia
Posts: 2,052
Default

Quote:
Originally Posted by kpm9 View Post
Shoot enough and that will happen with any gun. That is why I wear eye protection.
... and a hat.
__________________
"Corpseman?" Corpseman! Who looks stupid now, "The Decider" or "The One"?
Reply With Quote
  #8  
Old 01-22-2011, 07:40 AM
eastenn's Avatar
eastenn eastenn is offline
Senior Member
 
Join Date: Jun 2010
Location: TN
Posts: 200
Default

When I get an ejection that is irregular it is usually due to my grip, like if I shoot one handed or weak hand. If you are shooting fast or aren't holding the gun as tight then your wrists aren't absorbing as much of the recoil as normal, which could result in different rates the case is being ejected.

Think of it in 2 ways. First, imagine the gun locked firmly in place by some kind of shooting rest. When fired, only one thing can happen, the slide goes straight backwards and all the force of the slide is pulling back on the ejector.

Now, imagine holding it loosely in your hand and firing. Your arm is going to come back toward you some, as well as your wrist allowing the gun to rotate upward. So all that recoil now isn't just being used to send the slide backwards, some of it is being absorbed by your arms and wrist, which results in less force acting on the slide to eject the case.

May not be your answer, could be ejector related, but just offering observations from my own shooting.
__________________
K40 Stainless (traded to) -> PM9 (sold to fund) -> Ruger GP100 Blue 4"...now Kahrless
Reply With Quote
  #9  
Old 01-22-2011, 07:43 AM
eastenn's Avatar
eastenn eastenn is offline
Senior Member
 
Join Date: Jun 2010
Location: TN
Posts: 200
Default

One other thing, next time you go to shoot look at your slide and make sure it's clean around the ejection port. If you get a couple that hit you betwixt the eyes, look at the port again and see if there are any brass marks. That would probably tell me that the case isn't getting out of the way fast enough and the slide is hitting it on its way backward and whacking it right toward my face.
__________________
K40 Stainless (traded to) -> PM9 (sold to fund) -> Ruger GP100 Blue 4"...now Kahrless
Reply With Quote
  #10  
Old 01-22-2011, 10:05 AM
jocko's Avatar
jocko jocko is offline
Perpetual New Guy
 
Join Date: Sep 2009
Posts: 343
Default

I think Ripley 16 and Eastern have made two good points also... grip is very important..
__________________
. My PM9 has over 32,000+ rounds through it, and runs much better than an illegal trying to get across our border


NRA ENDOWMENT LIFE MEMBER
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
2009 KahrTalk.com. All Rights Reserved.