Inside of 8 round magazine

[Harrylee]

Have you ever wondered whats going on inside the magazine well I have so I built a jig with the same inside dimensions of a 9mm mag.Now you can see how things work or not work.You will see how compressed the spring really is.This is done all from 8 round magazines I believe my combination of the mod follower and 6 round spring is the best of both worlds,the 8 round spring had to much tension on it.Sorry about the one picture out of focus but what I trying to show there is the ears that come down have a large edge,what I did was to put a 45 on the inside edge both front and back, I saw that edge getting hung up on the spring.And with the lighter spring doesn't to nose dive as hard.I have tested this at the range with cor bon 115 jhp they have fairly wide mouth on them.It worked great and you can sling shot the slide with no trouble.I also did a extreme ramp on the follower.This mag setup works real sweet

[muggsy]

Harry,
The first picture shows the rim of the first cartridge in the extraction groove of second cartridge. I can see where this could be the reason for many of the nose dive jambs. Good job.

[Ikeo74]

Very good demonstration. Now I see in the top stock model why the top round pulls the second round out of the mag some when loading the first round. The case back edge is nested into the 2nd one's grove and drags it out because of the tight spring pressure.

[Harrylee]

I'm telling you guys the lighter spring is the ace in the hole

[OldLincoln]

Muggsy you hit the nail on the head!

[Harrylee]

I forgot to mention this is my favorite way to carry a 8 round mag

[Ikeo74]

Where did you get the spacer for the 8 rounder? Another poster on an MK9 post was inquiring about one.

[Harrylee]

I have been making my own grip extensions,I really wanted one but for the 8 round mag but no one made them.Here's one I did in walnut

[momo9mm45auto]

I have been making my own grip extensions,I really wanted one but for the 8 round mag but no one made them.Here's one I did in walnut

I just purchased 2 8 round mags K920G for my pm9. I see that there is a 1/2 space between the grip and the base of the gun mag area and this does NOT feel to good!

I am new to all of this. I also looked for a longer mag grip that would be flush to the gun, but no sells them.

HOW would I go about making one like yours????

Thanks

Mo

[jimsea]

Outstanding analysis Harry. Great job on making up the jig so people can now see what's going on in the mag tube and what parameters actually change when you mod the follower. The nay sayers will have a tough time arguing against a follower mod after seeing your jig setup.

As Muggsy said, the unmodified stock follower leaves the first round hung up on the second. The follower mod fixes that and brings the nose of the second round up to support the first round to prevent a nose dive.........two issues solved.

The follower mod allows the ammo to feed smoothly from day one of ownership without beating the crap out of your gun by slamming rounds into the base of the ramp, possibly damaging followers, and causing unnecessary wear and tear. And, it allows you to "tap, rack, and shoot" in a tactical/defensive situation in the event of a malfunction.

Just a note that on the 6 round mag you don't have to come down as far in the back but the front is the same as shown on your mod. Harry, instead of hand sanding these followers, you should make up a jig to allow them to be machined. It would be quicker, more precise, and you could probably sell a truck load here and elsewhere.