Mitch Rosen   Tommy Gun Shop   Kahr Shop   Crimsontrace
Results 1 to 3 of 3

Thread: P40 Will Not Eject Loaded Round, Stuck Between Barrel Hood & Ejector - Fixed!

  1. #1
    Join Date
    Feb 2024
    Posts
    1

    Default P40 Will Not Eject Loaded Round, Stuck Between Barrel Hood & Ejector - Fixed!

    I own many Kahr pistols in 9 and 40. They are my everyday carry and I am usually well pleased. I gave my son a Kahr P40 and after operationally testing it, I certified it fit for duty carry. The first thing he did upon receipt was attempt to unload the pistol so that his young son could touch it. Shazam! A loaded stoppage with the round stuck between the ejector and the barrel hood. Not a problem with shorter FMJ practice ammunition, but was an issue with high end Remington and Federal self defense ammo (a tad longer).

    I studied a YouTube video and then surmised that there may be two ways to skin the cat. The other guy did surgery on his barrel hood, motor grinding some of it away until the loaded round cleared. I thought the ejector could be too long (Spoiler The Ejector Was Too Long).


    I shortened the P40 ejector with a small file. Long Skinny flat metal ejector pinned into the plastic frame. I was careful not to scratch the polymer frame by inserting plastic between the ejector and the frame so the file would only work to shorten the ejector. A couple of thousandths of an inch shorter ejector provided for more room for the loaded cartridge case to eject past the barrel hood. Problem Fixed! About 30 short strokes with the small file and a slight rounding of the flat ejector towards the pistol center to provide another thousandth and all is well. The Kahr is back up!

    That was easy with no signs of forced violence.

    BTW, this malfunction is insidious because it is hard to detect in the normal range operation of shorter FMJ and no malfunctions were incurred with the Self Defense carry ammo until live ammunition was attempted to be ejected. I will modify my pistol testing to include a loaded for duty carry eject each round test to avoid this issue which I had never witnessed before. That is why I am sharing this story ... because I thought I had seen it all.

    A malfunction with the longer Self Defense ammo like failure to fire and remedial action "Tap Rack Bang" and the pistol would be down hard (loaded round stuck between barrel hood and ejector) until you applied a screwdriver to lever on the loaded case to eject it. Try doing that in the dark under stress.

    In this case, I declare that Kahr built a faulty pistol with a slightly out of specifications ejector that allowed me an very easy fix.
    Those that cry shoot it more (200 rounds brake in) don't know.


    Cheers.

  2. #2
    Join Date
    Sep 2009
    Location
    Wet & Wild Pacific NW
    Posts
    32,839

    Default

    That's a great fix. I've heard of the issue but not recently. Most did the motor grind thing. Filing the ejector has never been mentioned. Sounds like a great fix to me. One to be noted in the memory banks for sure.
    In Memory of Paul "Dietrich" Stines.
    Dad: Say something nice to your cousin Shirley
    Dietrich: For a fat girl you sure don't sweat much.
    Cue sound of Head slap.

    RIP Muggsy & TMan

    "If you are a warrior legally authorized to carry a weapon and you step outside without that weapon, then you become a sheep, pretending that JOCKO will not come today."

  3. #3
    Join Date
    Jun 2014
    Location
    North Carolina
    Posts
    450

    Default

    If I remember correctly, the PM/CM 45s had that issue and Kahr starting grinding out the hood to fix it. Decreasing the length of the ejector is a brilliant solution!!!
    Kahr P380 x2
    Kahr K9
    Kahr CM45
    Sig P938
    Sig P365 x2
    Sig P322
    1911 Range Officer 9mm
    M&P 9mm

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Tommy Gun   CrossBreed Holsters   Magnum Research new   Xssights