Quote Originally Posted by topgun1953 View Post
See if your extractor already has a radius on the bottom. I thought Kahr was doing that routinely now. Several members here have reduced the extractor tension in their P380 and CW380s. I reduced the tension on my P380 several years ago now by filing the back extractor pin down a small amount which in turn reduced the spring pressure on the extractor. A cheap part to replace with you go too far. Good luck.. Kahr will certainly fix you up if you send it in.
+++ on this. A no expense, reasonable thing to try before sending it back. My CW380 took shortening the rear pin by .025" in increments. If you search around there's another way to do it measuring the extractor tension but I had already done mine just by shortening the pin.